Prix FOB
Obtenir le dernier prix|
300 Piece Minimum Order
Pays:
China
N ° de modèle:
RP9066/8016
Prix FOB:
Localité:
China
Prix de commande minimale:
-
Commande minimale:
300 Piece
Packaging Detail:
Color box
Heure de livraison:
Within a month
Capacité de Fournir:
20000 Piece per Month
Payment Type:
T/T
Groupe de produits :
Personne àcontacter Mr. Benny
Luqiao,pengjie, Taizhou, Zhejiang
Description:
1. Easily open magazine latch for fast loading by one hand.
2. Continuous operation for high efficiency.
3. Touch -strike security system is safe for the operator.
RongPeng Air Nailer Wide Crown Stapler:
Model | ***6 |
Dimension | *5x**5.5x**1mm |
Weight | 0.*5kg(1.8Lb) |
Required pressure | *****0PSI(4.**7.5bar) |
Max.pressure | **0PSI(8.3bar) |
Nail Capacity | **0pcs |
Â
Air Nailer Trouble Shooting:
Â
    Symptom |           Problem                      |       Solutions         |
Air nailer's leak near top of tool or in trigger area |
1.O-ring in trigger valve are damage 2. Air nailer's trigger valve head are damage 3.Air nailer's trigger valve stem, seal or O-ring are damaged |
1.Check and replace O-ring 2.Check and replace 3.Check and replace trigger valve stem, seal or O-ring |
Air Nailer's leak near bottom of tool |
1.Loose screws 2.Worn or damaged O-ring or bumper |
1.Tighten screws 2.Check and replace O-ring bumper |
Air leak between body and cylinder cap |
1.Loose screws 2.Worn or damaged O-ring or bumper |
1.Replace bumper 2.Adjust the air pressure |
Blade driving fastener too deep |
1.Worn bumper 2.Air nailer pressure is too high |
1.Verify adequate air supply 2.Place 2 or 6 drops of oil into inlet 3.Check and replace O-ring or seal 4.Replace damaged air nailer internl parts |
Air nailer does not operate well: can not drive fastener or operate slugishly |
1.Inadequate air supply 2.Inadequate lubrication 3.Worn or damaged air nailer's O-ring or seals 4.Exhaust port in cylinder head is blocked |
1.Verify adequate air supply 2.Place 2 or 6 drops of oil into air nailer's inlet 3.Check and replace O-ring or seal 4.Replace damaged internl parts |
Tool skips fasteners |
1.Worn bumper or damaged spring 2.Dirt in front plate of the air nailer 3.Dirt or damage prevent fasteners from moveing freely in spray gun's magazine 4.Worn or dry air nailer's O-ring on piston or lack of lubrication 5.Cylinder cover air nailer's seal leaking  |
1.Repalce bumper or pusher spring 2.Clean drive channel on front plate 3.Air nailer's magazine needs to be cleaned 4.O-ring need to be replaced and lubricate 5.Replace sealing washer |
Tool jams |
1.Incorrect or damaged fasteners 2.Damaged or worm driver guide 3.Air nailer's magazine or nose screw loose 4.Air nailer's magazine is dirty |
1.Change and use correct fastener 2.Check and replace the driver 3.Tighten the magazine 4.Clean the magazine |
Pays: | China |
N ° de modèle: | RP9066/8016 |
Prix FOB: | Obtenir le dernier prix |
Localité: | China |
Prix de commande minimale: | - |
Commande minimale: | 300 Piece |
Packaging Detail: | Color box |
Heure de livraison: | Within a month |
Capacité de Fournir: | 20000 Piece per Month |
Payment Type: | T/T |
Groupe de produits : | Air Nailer |