Prix FOB
Obtenir le dernier prix( Negotiable )
|10 Barrel Minimum Order
Pays:
China
N ° de modèle:
IG800
Prix FOB:
( Negotiable )Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
-
Commande minimale:
10 Barrel
Packaging Detail:
PackingA component:190L, B component:18.5L;A component:19L, B component:300ml*7.
Heure de livraison:
-
Capacité de Fournir:
-
Payment Type:
T/T, L/C
Groupe de produits :
-
Personne àcontacter Gison
Foshan, Guangdong
~Features:
1.Two-component,neutral curing,high modulus and high
strengthcapacity,non-corrosive to metal,coated glass etc..
2.It has the advantage of low air permeability.
3.Good compatibility with other neutral silicone sealants.
4.Excellent weatherability and high resistance to ultraviolet
radiation, heat and humidity, ozone and temperature extremes;
virtually unaffected by sunlight, rain, snow and ozone.
5.Remains flexible over a temperature range of **8°F(**0℃) to
**2°F(**0℃).
6.The material is supplied as a paste, which cures into extremely
tough elastomeric silicone rubber ensuring a durable, flexible,
watertight bond upon exposure to atmospheric moisture.
Main applications:Â Â
Secondary seal and joint insulating glass.
Limitations:
1.Can not be used in structural glazing applications.
2.Is not appropriate for all will be leaking oil, plasticizer or
solvent surface.
3.Not for frost or wet surface.
4.Is not suitable for the place of continuous immersion or
year-round moisture.
5.Surface temperature is not below 0℃ or above *0 ℃.
6.Can not ontact with strong acids or bases.
7.Cannot be used on joint which bearing structural strength or
places of physical damage.
8.Hasnt performed adhesion and compatibility tests on project
substrates and all accompanying accessories.
Typical properties:
These values are not intended for use in preparing
specifications.
Test Method Property Unit Standard Result
GB/T ****7 (ISO ***0) Slump mm ≤3 0
GB/T ****7 (ISO ***8)Â Working time(after *0
min.) s ≤*0 2.3
GB/T ****7(ASTM D ***7)Â Tack free
time h ≤3 1.3
GB/T **1.1 (ISO ***9 )*******7 Hardness Shore
A *0~*0 *9
GB/T ****7 (ISO ***9)Â Tensile
strength MPa ≥0.6 1.1
GB ****6 Adhesion failure % ≤*0 0
GB ****6 (ASTM C **2) Heat aging  Â
weight loss % ≤*0 4.6
chalking  Nil Nil
cracking  Nil Nil
*GB: Chinese National Standard
ASTM: American Society for Testing and Materials
ISO: International Standardization Organization
The GB testing method is equivalent or partly equivalent to that
in the( )
Installation:
1.Surface preparation: Sealants may not adhere or maintain
long-term adhesion to substrates if the surface is not prepared
and cleaned properly before sealant application.Using proper
materials and and cleaning procedures is vital for sealant
adhesion.
2.Cleaning materials:clean, fresh solvent; clean, white cloths
free of lint or other lint-free wiping materials; primer (when
required).
3.Cleaning procedures:Remove all loose material (such as dirt and
dust), plus any oil, frost or other contaminants from the
substrates to which the sealant will be adhered. Do not use
detergent to clean the substrate as residue may be left on the
surface. Wet one rag with solvent and wipe the surface with it,
then use the second rag to wipe the wet solvent from the surface
before it evaporates. Change the cleaning rags frequently, as
they become soiled. If cleaned areas are again exposed to rain or
contaminants, the surface must be cleaned again.
4.Primers:IG**0 insulating glass silicone sealant will bond to
many clean surfaces without the aid of a primer. For
difficult-to-bond substrates, the use of a primer or special
surface preparation should be evaluated.
Emergent Treatment:
Keep out of reach of children. Once it contacts skin or eye by
accident, rinse the affected part with water for *5 minutes or
turn to doctor for help immediately.
Shelf Life:
*2 months from the manufacture date stored in cool & dry
place below *7 ℃.
Color:
Part A (base) of IG**0 insulating glass silicone sealant is availablein white, part B (curing agent) in black;Black color after mixing.
Packing/ Mix Ratio:
PackingA component:**5L,B component:*8.5L;A component:*8.5L,B component:**0ml*7.Mix Ratio by Volume A:B = *0:1.
Â
LIMITED WARRANTY INFORMATION PLEASE READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customers tests toensure that Foshan Shunde Mimdy Sealant Co., Ltd.s products are safe, effective, and fully satisfactory for the intended end use.
FOSHAN SHUNDE MIMDY SEALANT CO., LTD.SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
FOSHAN SHUNDE MIMDY SEALANT CO., LTD. DISCLAIMS LIABILITYFOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Pays: | China |
N ° de modèle: | IG800 |
Prix FOB: | ( Negotiable ) Obtenir le dernier prix |
Localité: | - |
Prix de commande minimale: | - |
Commande minimale: | 10 Barrel |
Packaging Detail: | PackingA component:190L, B component:18.5L;A component:19L, B component:300ml*7. |
Heure de livraison: | - |
Capacité de Fournir: | - |
Payment Type: | T/T, L/C |
Groupe de produits : | - |