Prix FOB
Obtenir le dernier prix|
- Minimum Order
Pays:
China
N ° de modèle:
FR333
Prix FOB:
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
-
Payment Type:
-
Groupe de produits :
-
Personne àcontacter Gison
Foshan, Guangdong
~Features:Â
 1.One component,neutral curing,non-corrosive to metal,
coated glass, marble etc.
 2.Outstanding fire resistance: FV*0( GB/T ***8).
 3.Good compatibility with other neutral silicone
sealants.
 4.Excellent watertight and smoke tight performance.
 5.Excellent weatherability and high resistance to
ultraviolet radiation, heat and humidity, ozone and temperature
extremes.
 6.Remains flexible over a temperature range of
**8°F(**0℃) to **2°F(**0℃).
 7.The material is supplied as a paste, which cures into
extremely tough elastomeric silicone rubber ensuring a durable,
flexible, watertight bond upon exposure to atmospheric moisture.
Main applications :
1.Used for sealing the fire resistance partitions or the
penetration holes of wires, cables ,cable trays etc.
 2.Glazing for all kinds of flame resistant windows and
doors.
 3.Flame resistance sealing for electronic installation.
 4.Many other uses for fire-stop systems.
Limitations:
 1.Can not be used in structural glazing applications.
 2.Is not appropriate for all will be leaking oil,
plasticizer or solvent surface.
 3.Is not suitable for airtight place, because the silicone
sealant need absorb air gas in the water cure.
 4.Not for frost or wet surface.
 5.Is not suitable for the place of continuous immersion or
year-round moisture.
 6.Not for substrates made of polypropylene, polyethylene,
polycarbonate and polytetrafluoroethylene.
 7.Can not be used on concrete and cement substrates.
 8.Can not contact with strong acids or bases.
 9.Cannot be used on joint which bearing structural strength
or places of physical damage.
 *0.Hasnt performed adhesion and compatibility tests on
project substrates and all accompanying accessories.
Typical properties:
 These values are not intended for use in preparing
specifications.
Test Method Property Unit Standard Result
GB/T ****7 (ISO ***0) Slump mm ≤3 0
GB/T ****7 (ISO ***4) Extrusion rate ml/min. ≥*0 **4
GB/T ****7 (ASTM D***7) Tack free time h ≤3 0.9
GB/T ****7 (ISO ***9) Tension recovery % ≥*0 *8
GB/T ****7 Extension/compression adhesion % ±*2.5 ±*2.5
GB/T ****7 (ISO ****0) Movement capability % ±*2.5 ±*2.5
GB/T ****7 (ISO *7) Elongation at breakafter immersion % ≥*0
*3
GB/T ****7 (ISO ****3) Weight loss % ≤*5 7
GB/T ***8 Fire resistance rate FV*0 FV*0
GB: Chinese National Standard
 ASTM: American Society for Testing and Materials
 ISO: International Standardization Organization
 The GB testing method is equivalent or partly equivalent to
that in the( )
Installation:
 1.Surface preparation: Sealants may not adhere or maintain
long-term adhesion to substrates if the surface is not prepared
and cleaned properly before sealant application. Using proper
materials and cleaning procedures is vital for sealant
adhesion.
 2.Cleaning materials: clean, fresh solvent; clean, white
cloths free of lint or other lint-free wiping materials; primer
(when required).
 3.Cleaning procedures: Remove all loose material (such as
dirt and dust), plus any oil, frost or other contaminants from
the substrates to which the sealant will be adhered. Do not use
detergent to clean the substrate as residue may be left on the
surface. Wet one rag with solvent and wipe the surface with it,
then use the second rag to wipe the wet solvent from the surface
before it evaporates. Change the cleaning rags frequently, as
they become soiled. If cleaned areas are again exposed to rain or
contaminants, the surface must be cleaned again.
 4.Primers: FR**3 fire resistant sealantwill bond to many
clean surfaces without the aid of a primer. For difficult-to-bond
substrates, the use of a primer or special surface preparation
should be evaluated.
Emergent Treatment:
 Keep out of reach of children. Once it contacts skin or eye
by accident, rinse the affected part with water for *5 minutes or
turn to doctor for help immediately.
Shelf Life:
 *2 months from the manufacture date stored in cool &
dry place below *7 ℃.
Color:
 Black, white, gray, other colours as clients requirement.
Packing:
 Disposable cartridges：net **0ml, **5ml, **0ml, **0ml,
**0ml; *4 pcs / box. Sausages: net **0ml, **0ml; *0 pcs /
box.
LIMITED WARRANTY INFORMATION PLEASE READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customers tests to ensure that Foshan Shunde Mimdy Sealant Co., Ltd.s products are safe, effective, and fully satisfactory for the intended end use.
FOSHAN SHUNDE MIMDY SEALANT CO., LTD. SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
FOSHAN SHUNDE MIMDY SEALANT CO., LTD. DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
| Pays: | China |
| N ° de modèle: | FR333 |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | - |
| Packaging Detail: | - |
| Heure de livraison: | - |
| Capacité de Fournir: | - |
| Payment Type: | - |
| Groupe de produits : | - |
