Prix FOB
Obtenir le dernier prix|
- Minimum Order
Pays:
China
N ° de modèle:
-
Prix FOB:
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
-
Payment Type:
-
Groupe de produits :
-
Personne àcontacter Ms. yu
136 Binjiang Middle St. Border Development Zone Dandong, Liaoning China, Dandong, Liaoning
DF****3(A) Inline Neutron Activation Coal Analyzer is of modular
structure, which can be installed around the belt without the
need to cut of the belt. When DF****3(A) runs, the belt will
slide on the inner bracket of the measuring unit and all the
materials passing through it will be tested, with no contact with
such materials during the whole testing process, thus it has no
influence on belt running. DF****3(A) can present the testing
results every one minute, thus accurately analyzing the content
of each element as well as relevant industrial indexes. It
carries effective supervision and control on coal quality, with
such features as no need to take samples, full material analysis,
high analysis accuracy, etc., which has efficaciously solved such
problems as lagging coal testing data, etc. By analyzing
real-time detection information, it can conduct effective control
on the production process, improve production technology, reduce
production costs and raise product quality.
Principle:
DF****3(A) adopts prompt gamma neutron activation analysis
(PGNAA) technology. After the nucleus captures the neutrons, it
will be in the excitation status. Upon de-excitation,
characteristic gamma rays corresponding to the nuclide will be
emitted. By analyzing the gamma energy spectrum, the composition
content of the materials under measurement can be got.
Technical parameters:
1.Measurement parameters: ash content, moisture, sulfur content,
SiO2, Al2O3, Fe2O3, CaO, MgO, Na2O, K2O, etc.
2.Calculation parameter: calorific value and any possible
parameters that can use empirical equation.
Product application:
1.Classification & Piling
DF****3 (A) system can be used jointly with the process control
software, so as to classify the materials, sort the coals with
higher calorific capacity to the maximum and improve the
effective utilization of various resources in the mine area.
2.Coal blending
DF****3(A) can be used jointly with the automatic batching
software to carry out the coal material blending control in such
industrial enterprises as coal mines, coal washeries, power
plants, etc. Weighing instrument and analyzer can send current
detection results into the batching software, and the latter then
controls the feeding amount of each raw material feeder according
to the target values of quality control parameters (calorific
value, sulfur content and ash content) as set up by the users, so
as to make the batching satisfy the quality control requirements.
The batching software can also adopt manual mode. The feeding
amount of each coal source can be controlled through the
intercommunication system, thus guiding coal blending.
Â
| Pays: | China |
| N ° de modèle: | - |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | - |
| Packaging Detail: | - |
| Heure de livraison: | - |
| Capacité de Fournir: | - |
| Payment Type: | - |
| Groupe de produits : | - |
