Hydraulic butt fusion welding machine

La description

 **0 pe hdpe pipe butt fusion welding machine with powful function**-Application:

PEpipes welding machine;

HDPE pipes welding machine;

PPpipes welding machine;

PB pipes welding machine;

any other plastic pipes available for welding... ...

 **0 pe hdpe pipe butt fusion welding machine with high quality**-Further parameters:

 **0 pe hdpe pipe butt fusion welding machine with high quality **- Our advantages:

• The main parts of the machine is aluminumZL**4, which makes it work more environmental friendly and efficiently... ...
•  
• **0 pe hdpe pipe butt fusion welding machine's main electrical components are imported from overseas, which are more reliable and stable, extend the life of welding machine and perform more efficiently.

• Packing details: first spread a layer of oil, and then be wraped by plastic film, put into a wooden box at last. This type of package can avoid getting rusty easily.

 **0 pe hdpe pipe butt fusion welding machine **- Operating instruction:

• The od card which matches the pipes must be used. Stuck the pipe tightly then fix them on the rack.
• Open the ends of pipes,put in the milling cutter, and fix the milling cutter on the rack. Start the milling cutter, mover forward the cylinder,close the fixture and cut the ends. when it forms into the continuous chips, lower the pressure to zero firstly, then open the fixture and close the milling cutter at last.
• Put down the milling cutter, close the ends, and check up the pipe of the two ends. Check up the temperature of the heating plate. For the first welding, the temperature of the heating plate should be heated over the pre-heated temperature . Every time for welding, the heating plate must be cleaned.
• Put the heating plate with the suitable temperature on the rack, close the fixture, make the end meets the end meets the heating plate fully and set the system pressure.
• When the end raises uniformly and the height of the crimps meet the requirements, the heating time should be lowered at the same time.
• When it get to the endothermic time, open the fixture quickly and remove the heating plate.
• Close the fixture quickly, adjust the pressure uniformly in the specified time and write down the cooling time.The pressure should be kept until the ends cool down completely.
• When it gets to the cooling time, adjust the pressure to zero, open the fixture, and remove the welded pipe.

ABOUT US:

•  we are professional plastic pipe butt fusion welding manufacturer in china.
• we can offer lower price but the great quality to serve our customers