Prix FOB
Obtenir le dernier prix( Negotiable )
|1 Set Minimum Order
Pays:
China
N ° de modèle:
-
Prix FOB:
( Negotiable ) Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
-
Commande minimale:
1 Set
Packaging Detail:
as customers request
Heure de livraison:
ship
Capacité de Fournir:
10 Set per Week
Payment Type:
T/T, L/C
Groupe de produits :
-
Personne àcontacter bingbing
the north park of Yishui County, Linyi, Shandong
6 YY type hydraulic oil press is
the simplest, mechanical operation in the oil yield efficiency is
higher, the replacement of wearing parts, less of a building area
of less an oil mill, this machine is mainly oil-bearing crops
object for processing: peanut, soybean, rapeseed, walnut, pine seed
peel (best), tea seed, sunflower seed oil crops,
etc.
 This machine is in accordance
with the principle of hydrostatic pressure transmission, hydraulic
oil as pressure transmission medium, extrusion and then the oil
will oil squeeze out.It is a closed loop system composed of two
parts:the hydraulic system and oil press.
Â
Performance and
characteristics
1. This machine is small volume, less coverage, easy to learn,
understand and less operation with low power consumption.
2. Frame type, hydraulic unit installed outside.
It is hydraulic machinery with
high pressure,efficient oil output, incense oil full-bodied, clean
and high quality, etc.
4. Not only manufacture all sorts of plants oil, but also meat oil,
clay, de-oiling,dehydration,degrease all kinds of chemical raw
materials.
5. This oil press except for all kinds of vegetable oil press can
also squeeze of animal oil press, clay, of , dewatering,
juice, etc.
The rules of
operating:
1. Note: Before start
(1) clean inside the tank and clean the hydraulic oil.
(2) check whether each part bolt is loose.
(3) the *5 reversing switch power supplied by the on-board stop
switch, the other three core wires side connected to the motor, the
motor need to check the rotary direction.
2, Extraction process:
(1) No load running for 1 to 2 minutes first, such as in winter and
spring, empty ***0 minutes, make the oil diluted and ease of
operation.
(2) Exhaust fume from fried materials, separate materials by plates
and put to feed bucket, keep oil surface is slightly lower than
expected on the bucket;Otherwise, the oil cylinder will over
travel. Push overall press under the oil pan, cylinder alignment
press oil pan, then switch on.
(3)Pull out explorers to the valve and switch on the power switch,
pressure bearing oil pan.(cylinder telescopic by manual reversing
valve, namely when the stem to open, press will do downward
movement and vice-versa)
(4) Only expert handlers allowed, Forbidden leave away while the
host is d in the process of booster, the main motor must stops
working when the pressure gauge reaches *0 million, otherwise it
will damage the hydraulic system.
(5) Start motor again after pressure gauge callback,turn off the
power supply if point to *0 MPa again, keep it stable to *0 MPa, If
material barrel oil finally no oil come put means oil has
drained.
(6)Lift pressure oil pan, hang hook at one end, the other side on
the VAT, and press pressure oil pan, lift charging barrel, pull out
the oil cake.
(7)Hold up oil pan, remove hook then prepare for the second
press.
Â
| Pays: | China |
| N ° de modèle: | - |
| Prix FOB: | ( Negotiable ) Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | 1 Set |
| Packaging Detail: | as customers request |
| Heure de livraison: | ship |
| Capacité de Fournir: | 10 Set per Week |
| Payment Type: | T/T, L/C |
| Groupe de produits : | - |
