La description
Mini
tiller is the new product in order to meet the needs of the masses
users, with reference to the lasted machine. The product produced
strictly with the the GB/T*********4 standard production and the
IS****1. The product has specific reasonable structure, superior
performance, convenient and flexible, good reliability, long life
and other advantages. The tiller can works in plains, hills,
mountains for rotary tillage fertilizing farmland homework, but not
suitable for rocky land.
   Mini tiller driven by dynamic
host and rotary cultivator, supporting power is basic diesel
engine, gasoline engine. The user can also match other model diesel
engine according to the actual need not greater than the specified
value.The
machine has simple compact structure, light weight, flexible and
convenient operation and reliable, maintenance convenience, good
traveling capability.
Â
Scope
of applications
This
machine can works in Ping-ba, hills, mountains, in upland and paddy
fields, tea plantations, orchards, flower and vegetable greenhouses
and small land area carries on the demand of the rotary tillage
soil preparation and so on, you can choose different matching
machine according to the needs of production field
operations.
The
operation methods:
(a)
run-in method
1, Before the break-in method
In order to extend the service life, you should get trial operation
before using, be sure to try first to get up to speed.Tighten
connection of components, charge sufficient fuel oil, lubricating
oil and water, check and adjust the v belt tension.Check the tire
pressure and the working condition of the handle.
2, Basic principles:
From low to high speed, load from small to large
3, The purpose of the break-in:
In good technical conditions and the conditions of lubricating oil
is as follows, by slowly increasing load, and gradually to the
surface of the parts with grinding uneven parts, for the normal use
of micro tillage machine and prolong service life.
4, Break-in matters needing attention
(1) First do some braking and steering test, check the operating
mechanism is working correctly.
(2) after the break-in, strike hot oil off the bottom of the
pan.Cleaning the oil pan and parts in the lubricating oil system,
the filter, and then add new oil, add right amount diesel, no load
running in low speed a few minutes to wash and remove iron filings
grinded down.
(3) check the nut and fasten up all the screws under the cylinder
head and other nuts, screws.
(4) check and adjust the valve clearance, a free travel of clutch
and brake.
(5) The mini tiller also need the running-in after overhaul, but
perform half.
(2) The details of operation:
Check the lubricant before preparation and installation, according
to the requirements of the instructions, diesel oil, cooling
water and gearbox lubricant.
1, check the tire pressure whether in line with the
requirements.
2, check whether the main parts of bolt fastened (focusing on
frame, drawing frame and the gearbox housing, driving wheel and
other connection parts).
3, the clutch handle in the "off" position, the gear lever in the
neutral position, the throttle lever in "start" position, the
throttle switch on: "open" position.
4, decompression, machine-cleaned pulled, started in the engine
specification of diesel engine.
5, To start up
(1) check whether the left and right steering gear is reliable
joint (inspection methods: don't hold the hand, swinging arm, when
micro tillage machine can not rotate, means gritting steering wheel
sets have joint)
(2) diesel engine starts, leave off the clutch, shift lever to the
required gear.
(3) step on the gas can also use the small throttle (no load),
relax the clutch handle, slowly and steadily to the "close"
position, the mini tiller starts.
(4) First slow the clutch, then  immediately began after the
combination, in order to reduce the clutch slippage and the wear
and tear.
6, The choice and transformation of gear
(1) in the farming field , choose at most I and II gear, otherwise
will cause overload, which affects the service life of it.
(2) In order to shift to the top speed, first you must separate the
clutch, then shift lever to the required gear.
(3) For shifting from low to top speed, should first step on the
gas to increase speed then shift the gear, from top to low gear,
should reduce the speed again after the shift to make sure smooth
driving and avoid damage to the gear.
7, Direction changing
3 .(1) reduce the throttle
 (2) in flat road and slope, the machine will turn left when
we handle left and turn right when handle right.
 (3) When descend the slope, should operate
the opposite way.Namely, it will turn right when handle the left
hand and turn left when handle the right direction.
8, Backward
  put the clutch to *7 "off" position, shift lever in
reverse *8 position, then slowly and put down the clutch to
the "close", the mini tiller will backward. At this point is
easy to use small throttle.
*0, Parking and braking
(1) Put the clutch to the "off" position, the gear lever in high
speed position, gradually decreasing to throttle 3, parking can be
implemented. After parking handle clutch brake *5 back on the
"close" position, During the long winter, must take out all cooling
water and keep it outdoor and cover the exhaust pipe in case of
rain water; cover the triangle in summer noon in case of thermal
deformation and aging.
(2) The mini tiller parking but not stop, you should handle the
clutch brake leve to *7 in "brake" position.
(3) Brake single brake, turn down the gas. 3, quickly put on the
clutch brake lever handle *7 "brake" position; use the trailers
brake if have the trailer, forbidden to use chassis brake.
Generally, don't stop on the ramp. If must, should shut down
shift, put triangular underlaying the wood tire .
*1, Driving under special conditions
(1) The transverse slope tillage lower speed, roller wide-track
appropriately and try not to be turning in the direction of
uphill.
(2) Night work. in advance, familiar with tillage area topography
and have good lighting. At the same time, the driver must have
enough sleep before.
(3) How to pass through sideways: you must pass channel in low
speed sideways. If must go through straight you should slowly down
and pass without dash.
*2, Normally, you should use first gear, but you can use second
gear when working in paddy field with less load. Make sure do much
weeds on the coulter or will increase parts consumption and loss of
power. Shut down the throttle while take away weeds. Clutch handle
in off position and screw off the rotary tillage separation claw,
keep in separation and use the hook to get weeds away.
Â
| Pays: |
China |
| N ° de modèle: |
-
|
| Prix FOB: |
(Negotiable)
Obtenir le dernier prix
|
| Localité: |
- |
| Prix de commande minimale: |
- |
| Commande minimale: |
1 Set |
| Packaging Detail: |
as customers request |
| Heure de livraison: |
within 15 days |
| Capacité de Fournir: |
5 Set per Week |
| Payment Type: |
T/T |
| Groupe de produits : |
mini tiller
|
