La description
The heating zone is divided into induction heating and radiation
heating. Induction heating first rises the work-piece to a certain
temperature and then enters the radiation heating zone to heat
preservation. According to the principle and characteristics of
induction heating, the conveying steel strip (mesh belt) will not
be heated at high temperature in this heating section. The power
consumption and heat control of steel strip (mesh belt) repeatedly
heated and cooled by high temperature in working state are saved.
In addition, the work-piece can quickly reach the required
temperature in the induction heating section. The heating
efficiency is improved. Shorten the heating length. Reduce the area
occupied. The radiation heating in the back section makes up for
the possible in-homogeneity of the rapid heating of induction
heating. So that the work-piece can get uniform heat and sum in
this area. Heat preservation effect.
The product is used in bright solid solution (annealing) of
stainless steel pipe. Retreat from the black. Offline production
and other metal pipes. Bar material. Heat treatment of wire rod.
Small and medium-sized batch of other parts of the machinery, such
as bearings. Standard parts. All kinds of hardware tools carburize
in the control atmosphere. Quenching and other heat treatment.
Net belt annealing furnace
Note: the crawler stainless steel annealing production line
produced by Luoyang IWH Company is a complete bright annealing
production line which integrates multifunctional annealing. It can
not only remove multiple stainless steel seamless or welded pipes
at one time, but also return stainless steel pipe fittings, copper
parts and stainless steel standard parts. The total length of the
production line is *5 meters, of which the main part is *1 meters
and the front and rear frame is *4 meters. The annealing speed of
the annealing furnace depends on the thickness and outer diameter
of the tube wall. The production line is based on the high power
IGBT all-solid-state ultra-audio induction heating equipment
developed by our company for stainless steel pipe annealing as the
main bright machining device, and the on-line annealing of the
device can be realized. Compared with the traditional reticulated
belt resistance heating annealing furnace, it has the
characteristics of low heat consumption, low cost, long life,
safety and reliability, convenient maintenance and operation,
reducing labor intensity, open and using, and does not need to
preheat for a long time, so it can effectively shorten the delivery
time. Now it has been widely used in stainless steel pipe making
industry. It has been proved that this production line is an ideal
choice for stainless steel pipe production and processing
enterprises to configure production equipment.
Luoyang IWH company provides a complete set of continuous bright
annealing equipment for stainless steel pipe manufacturers, which
is specially designed to meet the needs of bright annealing
production of stainless steel pipe manufacturers. According to the
requirements of demand side annealing process, the complete set of
equipment is made up of IWH series all-solid-state IGBT ultra-audio
induction heating power supply, induction heating furnace head,
muffle furnace, gas protection seal cooling device, infrared
constant temperature device. Transmission device, main drive
loading and unloading frame, ammonia decomposition device
(selection), water cycle cooling system, intelligent type including
plc electronic control system and touch screen display (can be
reserved for upgrading), etc. Production line.
Technical parameters:
1) according to the way of kilogram / hour, the feed should be
controlled automatically, * when the large production capacity
needs to reach **0KG/, and the width of the mesh belt is at
least **0mm.
2) there are 2 heating zones, * the temperature is ***0 ℃, the
temperature is controlled automatically, and the length of heating
zone is about 4 meters.
3) heating furnace tank, can withstand temperature to ***0 ℃,
length is about 5 meters;
4) cooling water jacket after heating zone, with a length of *0
meters;
5) automatic temperature control system;
6) the overall length of the equipment is about *0 meters.
7)stainless steel pipe with diameter within **1mm of heating
pipe
Â
| Pays: |
China |
| N ° de modèle: |
IWH HIGH EFFICIENCY
|
| Prix FOB: |
( Negotiable ) (Negotiable)
Obtenir le dernier prix
|
| Localité: |
LUO YANG, HE NAN PROVINCE, CHINA |
| Prix de commande minimale: |
- |
| Commande minimale: |
1 Set |
| Packaging Detail: |
FULLY PACKAGE |
| Heure de livraison: |
DHL and other delivery ways |
| Capacité de Fournir: |
5 Set per Month |
| Payment Type: |
Other |
| Groupe de produits : |
- |
