Prix FOB
Obtenir le dernier prix113 ~ 169 USD /
|1 Minimum Order
Pays:
Lithuania
N ° de modèle:
GTCOM
Prix FOB:
113 ~ 169 USD / Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
113
Commande minimale:
1
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
-
Payment Type:
PayPal
Groupe de produits :
-
Lithuania
Personne àcontacter Zivile
Kaunas, Kaunas
APPLICATIONS:
• Receiving of Contact ID codes from the security control panel
and their converting into SMS readable format.ÂÂ
• Supports sia contact id codes receiver standard
• PSTN line RING TIP emulator. Module emulates PSTN Contact ID
receiver.
•Module can work with any central panel which has PSTN
communicator and meets Ademco Contact ID data format
according to SIA SIA DC**5 standard.
• Tested withfolowing Central panels: DSC PC***6; DSC ***5; DSC
***0; Paradox SPC****8EX; Paradox Digiplex Evo**2; Paradox
Esprit; Pyronix Matrix 6; Teletek CA*2SE; Satel CA**0; Texecom
• System control by using maxim-dallas iButton keys (iButton
DS***0A - *4 bit id)
• 1 temperature probe
• 4 outputs for remote control via gsm cell phone
• 8 general alarm s including power supply voltage
monitoring via sms messages
• **0 remote control users via free short call
• **0 users control by GSM call or using maxim-dallas iButton
keys
• Configuration using standard mini-USB cable
A  lot  of  security  control  panels
 are  able  to  transfer  events
 to  the  security  monitoring
 stations  via  PSTN  land phone line
via Contact ID protocol. These messages help to quickly find out
where the event took place and what kind of event is it, e.g.
triggered sensor, security system in ARM state, security system
troubles, network failure etc.
However a lot of security control panels are not able to send SMS
to a user to inform about alarms and other events  of
 the  security  system.  To  solve
 this  problem  the  module  GTCOM
 has  been  develop ed,  which  can
 simulate PSTN  line,  receive  DTMF
 Contact  ID  messages  and  convert
 them  into  readable  format  as
 well  as  to  send
 SMS message to a user via GSM network.
The module is compatible with any security control panel, which
supports DTMF (tone) dialling and Ademco Contact ID data
format according to SIA SIA DC**5 standard.ÂÂ
The GTCOM module may be applied for protection of house, garages,
cottages, vehicles as well as for access control, gate
control, objects' automation, smart house and temperature co
ntrol. For premisses protection and in many other
applications.
The GTCOM module has 7 zones, therefore it can be used to expand
zones of the security control panel.In the event of burglary, the
device, depending on programmed operation algorithm, is able
 to call or to send SMS to up to *6 users. A user is
able to hear what is going on premises after answering a call or he
may make a call by himself. A user is able to receive an SMS
with detailed information about status of each protected zone and
number  of alarm events. The user is able to control
the device via SMS messages only if he knows user's password. If a
call is being performed from the telephone number not
included in the system„s data base, the call is rejected
immediately.ÂÂ
The  module  has  system  voltage
 control.  If  power  supply  voltage
 drops  below  the  defined  value,
 a  user automatically will be notified via SMS.
The SMS message includes voltage of backup battery (System
Voltage). The module has external temperature sensor. A user
receives information about temperature alarms and
restores via SMS messages.ÂÂ
ÂÂ
| Pays: | Lithuania |
| N ° de modèle: | GTCOM |
| Prix FOB: | 113 ~ 169 / Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | 113 |
| Commande minimale: | 1 |
| Packaging Detail: | - |
| Heure de livraison: | - |
| Capacité de Fournir: | - |
| Payment Type: | PayPal |
| Groupe de produits : | - |
