La description

1. Specification Conformance
AWS A5.*0 E*1T*1 GB/T*********1 E**1T*1 / JIS Z***3 / YFW C*0DR
 2.Description
E*1T*1 is a gas-shielded carbon steel wire for fabrication of mild and low carbon steel, steel-structure construction ,bridge-building and pressure vessel grades. This all position wire provides good welding performance with **0% CO2. It provides consistent chemistry, steady arc, low spatter and an excellent bead appearance.
AWS A5.*0E*1T*1 is a kind of TI type flux cored wire for CO2 welding ,it has high cladding efficiency, good welding technical performance in all-position welding, apply for low carbon steel and **0MPA grade strength steel welding, such as ships, pressure vessels, mechanical equipments and bridges.
E*1T*1 is a kind of Ti type flux-cored wire by CO2. It is applied for all-position welding which includes vertical down welding. When the welding is taken, there small splashes, and the electric arc is stable and gentle. Furthermore, it has high slag detach ability and beautiful shaped welding seam. It is superior to solid welding wires in cladding, welding technical performance and mechanical properties of deposited metal. It is used for the welding of low carbon steel and **0 grade strength steel of moderate thickness plates welding
3. Chemical Composition of Deposited Metal (%)
C≤0.*8, Mn≤1.*5, Si≤0.*0, P≤0.*3, S≤0.*3, Cr≤0.*0, Ni≤0.*0, Mo≤0.*0, V≤0.*8, Cu≤0.*5
4.Mechanical Properties of Deposited Metal
Yield Point≥**0Mpa, TensileStrength≥**0Mpa,
Elongation≥*2%, Test Temp**0°C,Impact Energy≥*7J
5. AVAILABLE DIAMETER
0.8MM/ 0.9MM/ 1.0MM
6. PACKAGE
*5kgs/spool, *2cartons/pallet, *2pallets/*0'container
One spool is vacuum packed by aluminum film and then one carton outside
7. Shielding Gas
**0% CO2
8. Recommended Current (DC+) and Voltage Range
Welding position Flat *-Dia.1.2 mm**-Current Range**0A ~**0A *-Voltage Range *0V ~*0V*-CO2 Flow*5~*5 L/Min;
Dia.1.4mm**-Current Range**0A ~**0A *-Voltage Range *4V ~*8V*-CO2 Flow*5~*5 L/Min;
 Dia.1.6 mm*- Current Range**0~**0A*- Voltage Range *6~*5V*- CO2 Flow*5~*5 L/Min
 Procedures may vary with change in position, base metals, filler metals, equipment and other changes.