Prix FOB
Obtenir le dernier prix30 ~ 35 / Cubic Meter
|1 Forty-Foot Container Minimum Order
Pays:
Turkey
N ° de modèle:
-
Prix FOB:
30 ~ 35 / Cubic Meter Obtenir le dernier prix
Localité:
Turkey
Prix de commande minimale:
30 per Cubic Meter
Commande minimale:
1 Forty-Foot Container
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
-
Payment Type:
-
Groupe de produits :
Turkey
Personne àcontacter Mr. Harun
Organize Sanayi Bolgesi 3.Kisim 23.Yol, Elazig, Elazig
Standard is defined as TS EN *****- Thermal Insulation productions
for buildings- products made from expanded polystrene (EPS)-
properties .
EPS is a thermoplastic material, typically White, with a closed
pore in foam, obtained from petroleum by polymerizationof styrene
monomer. In special productions, there are productions in
gray/black tones where the particles are processed to refect long
wase radiation.
In the EPS products obtained by inflating and fusing the polysyrene
particles, the blowinfgas used to inflate the particles and obtain
the foam is pentane. The pentane, an organic component, is
displaced by air during production and very shortly after
production, after allowing the formation of numerous small pores in
the particles. The pentane gas that turns on turns into CO2 and
water oopor (H2O) already present in the atmosphere with the
releaseof the pentane, still air is trapped in a small number of
closed porosity cells (3 to 6 billion in 1 m3 EPS depending on
density) found in the material. *8% of the material is still air;
2% is polystyrene.
The material passes through the pre-blowing process after being
supplied as raw material in small particles. At this time, the
pentane gas in the particles displaces the air and the desired
density of the material is achieved at this stage to a large
extent. Afterwards, expanded particles resting in the special silo
are fused to each other with the help of water vapor in the mold
and the properties of the material are obtained. As a result of the
merging of the grains, a continuous mass formed by the polygons
merged with each other without a space between them appears in the
view of the whippet.
Subsequent production steps will vary depending on the area of use of the material. The thermal conductivity rating value is 0.**0 ≤ lambda ≥0.**0 W/m.K. Usage temperature is between **0/**5 oC. It can be produced as plate and mold in different dimensions and technical specifications according to purpose of use.
Â
Pays: | Turkey |
N ° de modèle: | - |
Prix FOB: | 30 ~ 35 / Cubic Meter Obtenir le dernier prix |
Localité: | Turkey |
Prix de commande minimale: | 30 per Cubic Meter |
Commande minimale: | 1 Forty-Foot Container |
Packaging Detail: | - |
Heure de livraison: | - |
Capacité de Fournir: | - |
Payment Type: | - |
Groupe de produits : | Insulation Board |