Prix FOB
Obtenir le dernier prix4300 USD / Set ( Negotiable )
|1 Set Minimum Order
Pays:
Thailand
N ° de modèle:
BatteryCare 48V battery desulfator
Prix FOB:
4300 USD / Set ( Negotiable )Obtenir le dernier prix
Localité:
Thailand
Prix de commande minimale:
4300 per Set
Commande minimale:
1 Set
Packaging Detail:
-
Heure de livraison:
15 days
Capacité de Fournir:
10 Set per Month
Payment Type:
PayPal, L/C, T/T
Groupe de produits :
-
Personne àcontacter Mr. Suwit
phaholyothin rd., bangkaen, bangkok
BatteryCare Battery Desulfator / Reconditioner for Electric Forklift *6V / *8V
Battery sulfation takes place when a lead-acid battery discharges. The lead from the plates combines with the electrolyte (dilute sulphuric acid) to make lead sulfate. When the battery is recharged this process is reversed however, some of the lead sulphate will crystalise on the lead plates. The deeper the battery is discharged, the more the lead sulphate is likely to crystalise acting as an insulator and reducing the plate area in contact with electrolyte. Over time this build up of lead sulphate crystals will kill the battery.
Reconditioning a Lead Acid Battery
Desulfation(also know as
Reconditioning) offers a way for dead
batteries to be brought back to life and for tired batteries to
be rejuvenated. Desulfation will not bring batteries with a
shorted cell, or worn out plates back to their former glory, but
it is a valuable tool for anyone depending on battery storage for
power who cannot afford to buy new batteries.
When lead sulphate crystals build up on the lead
plates, it is not an easy task to remove them and thereby
recondition the battery. As more and more
crystallisation occurs, the voltage required to shift the
crystals (dissolving them back into the electrolyte) also
increases. But, if you were to put a constant high
voltage through the battery it would overheat and could
potentially explode. Pulse conditioning
is therefore used to ensure that only the sulphate crystals are
affected and the battery does not overheat.
Â
Every lead acid battery has a resonant frequency. If
sufficiently pulses of electricity (high frequency, high voltage,
but low power) are sent into the battery, rhythmic beating
(resonance) of the plates causes the crystalline deposits to
break up and the sulphate returns to the electrolyte solution.
This process can
take a matter or weeks during which time the
battery must be trickle charged (in parallel with the
desulphator) so that the battery ends up reconditioned and fully
charged.
Note that the voltage measured across the battery terminals will
drop as the desulphation takes place as the internal resistance
of the cells is reduced by the clearing of the crystals on the
lead plates.
BatteryCare Desulfator utilized this technique to recondition the sulfated or dead lead-acid battery.
FEATURESÂ Â
See Video from youtube:
Telecom UPS Battery Desulfation  Part 1  Part 2<<< click
Inside Transparent Battery During Desulfation  Part 1  Part2 <<< click
Forklift Battery Desulfation  << click
Golf Kart Battery Desulfation <<< click
Pays: | Thailand |
N ° de modèle: | BatteryCare 48V battery desulfator |
Prix FOB: | 4300 / Set ( Negotiable ) Obtenir le dernier prix |
Localité: | Thailand |
Prix de commande minimale: | 4300 per Set |
Commande minimale: | 1 Set |
Packaging Detail: | - |
Heure de livraison: | 15 days |
Capacité de Fournir: | 10 Set per Month |
Payment Type: | PayPal, L/C, T/T |
Groupe de produits : | - |