Prix FOB
Obtenir le dernier prix|
- Minimum Order
Pays:
China
N ° de modèle:
L-2102L
Prix FOB:
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
-
Payment Type:
-
Groupe de produits :
Personne àcontacter Jacob
No.50 Tangxia Industrial Zone, Dongguan, Guangdong
LW****2L :Â **0MHz
Â
Specifications:
Â
Sampling
Sampling type :Real time sampling     equivalent sampling
Sampling rate :1GS/s    *0GS/s
TEST METHOD：
Real-time
Equivalent
AVERAGE VALUE      after all the channels have carry out N times sampling，the number can be selected between 2:4:8:*6:*2:*4:**8 and **6.
Â
nput coupling ï¼ˆDC:AC:GND）
Input impedance    1±2ï¼…Mohm *4±3pF in parallel
Probe attenuation ratio setting      1×，*0×，**0×，***0×
Maximum voltage      **0V（DC+AC Vpp:1Mohm Input impedance）
Time delay between channels（typical）    **0ps
Â
level
Waveform interpolation Sin(x)/x
Record length 2×**0k sampling point
Storage depth Signal channel is *5k, dual channel is *2.5K
Scanning range（s/div）      2ns/div**0s/div Follow ****5 step
Sample rate and delay time precision   ±*0ppm（any more than1ms Time interval）
Time interval (Laplacian T)measure precision (full bandwidth）    sole：±ï¼ˆ1 sampling interval time ***0ppm×reading*0.6ns）
More than *6 average value：±ï¼ˆ1 sampling interval time ***0ppm×reading*0.4ns）
Â
Vertical
Analog digital converter (A/D)Â Â Â Â *-bit resolution with synchronous sampling for 2 channels
Scope of deflection coefficient
 (V/div) 1mV/div ~*0V/div（in BNC)
Displacement range more than±*0 div
More meaning **0 MHz,*0MHz,*0 MHz,*0 MHz
A single bandwidth **0 MHz,*0MHz,*0 MHz,*0 MHz
(Typical) optional band width limitation     *0 MHz
Low-frequency response
(AC coupling, *3dB)Â Â Â Â Â less than *0Hz(in BNC)
Rise time（typical in BNC） 3.5 ns respectively in bandwidth or less (**0 MHz, *0 MHz, *0 MHz, *0 MHz)
DC gain precision (by adopting sampling
or sampling mode of average value)±5%if the vertical sensitivity is 1mV/div or 2mV/div;
±4%     if the vertical sensitivity is 5mV/div;
±3%     if the vertical sensitivity is *0mV/div to *0V/div;
DC measurement precision
(by adopting average sampling mode)Â Â If vertical displacement is 0 and N more than *6:
±(5%×reading*0.1 grid*1mV) by selecting 1mV/div or 2mV/div;
±(4%×reading*0.1 grid*1mV) by selecting 5mV/div;
±(3%×reading*0.1 grid*1mV) by selecting *0mV/div to *0V/div;
If vertical displacement is not 0 and N more than *6:
±u****4X(3%×(reading+vertical displacement reading)+(1%×vertical
displacement reading)*0.2div;
To add 2mV when setting from 5mV/div to **0mV/div: To add set
value by *0mV when setting from **0mV/div to *0V/div;
Measurement precision of voltage
difference (Laplacian V) (by adopting sampling
 mode of average value)      Voltage difference between any 2 points on the waveform after
calculating average value for at least *6 captured waveform under the
same setup and environment conditions: ±(3%×reading*0.*5div
Â
Trigger
Trigger sensitivity Internal Trigger：less than 1div  EXT trigger：less than 0.2V
Trigger level scope Away screen center±8div
(Typical) precsion of trigger
level for signal of which
Rise Time or Descend Time is
not less than *0ns  ±ï¼ˆ0.3div×V/div）(within scope of ±4div from screen center)
Pre-trigger ability  Normal mode/scanning mode, pre-trigger/delay trigger with adjustable
pre-trigger depth
Inhibition scope    **0ns 1.5s
(Typical) level set to *0%Â Â Â Â Â Operation if frequency of signal is not less than *0Hz
Edge trigger
Edge type      Ascend, descend, ascend & descend
Pulse width trigger
Trigger mode To be more than, less than or equivalent to positive/negative pulse width;
Pulse width scope  *0ns**0s
Alternate trigger
CH1 trigger   Edge, pulse width
CH2trigger    Edge, pulse width
Â
Measurement
Cursor    Manual mode Voltage difference (Laplacian V ) between cursors;
Time difference (Laplacian T ) between cursors;
Reciprocal of Laplacian T ( 1/Laplacian T )
Tracing mode Voltage and time of waveform point
Automatic measurement mode
It is allowed to display cursor during automatic measurement.
Â
Automatic
measurement  Peak value, amplitude, the maximum value, the minimum value, top value, bottom value,middle value, average value, root-mean-square, overshoot, preshoot, frequency, cycle,Rise Time, Descend Time, positive pulse width, negative pulse width, positive duty cycle,
negative duty cycle and delay
Specify parameter measurement   Three kinds
Mathematical operation +, -,×, ÷
Stored waveform   Internal:*0 groups of waveform and *0 kinds of setup
USB：**0 pairs of waveform storage storage, **0 groups of interface
FFT Window Hanning,Hamming,Blackman-Harris,Rectangle
Sampling point     ***4 points
Lissajous's figure   phase difference  ±3degrees
Trigger frequency meter
Reading resolution 6
Trigger sensitivity less than *0Vrms
(Typical) precision ±*1ppm (*1 word)
Â
Display
Display type  Diagonal with diagonal of **8mm (7 inches)
Display resolution **0 (horizontal) ×RGB×**0 (vertical pixels)
Display color color
Waveform display area  Level *2, *5 dot/div; 8 vertical, *5 dot/div
Contrast (typical)Â Â adjustment
(Typical) backlight
strength  **0nit
Category of display
language Simplified Chinese, traditional Chinese, English, Spanish, Portuguese, French
Interface functions
Standard configuration  1USB OTG
Â
Power
Power voltage ******0VACRMS，*****0Hz，CAT II
Power
consumption  To be less than *0VA
Fuse F1.6AL **0VÂ on power
board in the machine.
Â
environment
Temperature range operation：(0℃～**0℃)
Non-operation：(**0℃～**0℃)
Cooling method    Fan force to cool
Humidity range     less than **5℃：less than *0%RH
(**5℃～**0℃)：less than *0%RH)
Â
altitude
Operation: less than 3,**0m
Non-operation: less than*5,**0
| Pays: | China |
| N ° de modèle: | L-2102L |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | - |
| Packaging Detail: | - |
| Heure de livraison: | - |
| Capacité de Fournir: | - |
| Payment Type: | - |
| Groupe de produits : | Oscilloscope |
