DEKA ER*0S*6,
3Si1wire is used for
semi-automatic welding of carbon and low-alloy steels in shielding
gases: **0% CO2, *0% Ar + *0% CO2. Micropolishing of the wire
surface with a special chemical composition increases the
conductivity of the wire, reduces the energy required for welding
and improves the mechanical characteristics of welds. The absence
of shedding of copper coating in the feed mechanisms, along with a
low friction coefficient, reduces downtime of welding equipment
related to periodic cleaning of guide channels/hoses and increases
the lifetime of the tip.
Chemical composition, %:
C ≤0,*0
Si 0,*0 0,*5
Mn 1,*0 1,*0
P ≤ 0,**0
S ≤ 0,**5
Ni ≤ 0,*5
Cr ≤ 0,*0
Benefits of usage:
Absence of shedding that leads to clogging of
the feeding mechanisms.
There are no additional short circuits when
working at high currents.
Cheaper than copper-clad
wire
Welding torch consumables last
longer
Reduced harmful effects on the body due to the
lack of coverage
Can be used for almost any type of
welding
Has a wide temperature range of
use.
Large range of products.
Available diameters: 0.8 mm, 1.0 mm, 1.2 mm,
1.6 mm and intermediate diameters.
