Description
CATL Battery Walk In Test Chamber
JOEO Walk In Test Chamber\'s temperature cyclic stress screening is
to change the external environmental stress by using the
temperature acceleration technique (the product produces
alternating expansion and contraction when circulating in the upper
and lower extreme temperatures) under the design strength
limitation, so as to generate thermal stress and strain in the
product.If you need more models about our test equipment, please
reference our chamber-testing（.）com
It can set different stress screening temperature change rate
5℃/min,*0℃/min,*5℃/min,*0℃/min
Walk In test chamber(ESS chamber) is suitable for the whole
product, parts and materials for high temperature, low temperature,
high and low temperature cycling & temperature stress screening
(ESS) test and constant humidity and cyclic damp heat test.
Meeting standards
MIL-STD****4, MIL***4A****6, MIL****4A**9, NABMAT****2,GJB*******0,
GJB/Z***5.1.6, IPC****1
SAFETY IN THE LABORATORY AND PROTECTION OF THE STAFF
During the temperature tests, overchargings or malfunctions of the
batteries may occur. This can lead to the destruction of the
batteries.
Increasing storage sizes cause increasing impacts of possible
failures and potential risks during tests with lithium batteries.
For this reason, safety in the laboratory, in particular the
protection of the staff, during such tests has the highest
priority.
To assure this safety in your lab chamber during tests with lithium
batteries in a temperature- or environmental humidity chamber, we
can offer safety devices. Here, JOEO Battery Walk In Test Chamber
following customers demand that the safety test chambers can be
adapted individually, Please feel free to inquiry from us
online!
JOEO SPECIAL ADD-ON COMPONENTS CAN BE SUPPLEMENTED FOR TESTING
LITHIUM-ION BATTERIES
Electrical door lock system
Optic and acoustic alarm
Pressure release flap
N2 Inertia Unit
O2 Measuring (additional option for N2 Inertia)
Fire detection system using a CO gas detection sensor
Fire detection via temperature measurement (alternative)
Flushing device using in case of fire
Over pressure release via burst disc including reinforced inner
container
REFRIGERATION SYSTEM
In the process of cooling, from **0℃ we just turn on the first
compressor, when the temperature down to *7℃, the second
compressor will start to work.In this way, we not only can
guarantee the cooling rate, but also energy saving, and extend the
life of the compressor.
JOEO Battery walk in test chamber\'s Compressors equipped with
world famous brand such as Tecumseh (France made), Bitzer or GEA
BOCK (Germany made).
Shock absorption and noise reduction process,slow down the
vibration, protect the compressor.The new pipe bending technology:
The bending process can minimize the connector point and make
refrigerant flow more efficiently.
It applies Denmark DANFOSS and Japanese SAGLNOMIYA solenoid valves
to improve the overall reliability of the equipment.
