Description
Standards:
GB/T***3.****5 Environmental Testing of Electronic and Electrical
Products Part 2: Test Methods, Test SQ: Simulated Solar Radiation
on the Ground
ASTM D***9 Test Method for Ozone Cracking of Rubber in a Controlled
Environment
ISO ***1 Test method for resistance to ozone cracking of vulcanized
or thermoplastic rubber
ASTM D***1 Standard Test Method for Rubber Aging - Ozone Surface
Cracking in Outdoor or Test Chamber (Triangular Specimen)If you
need more models about our test equipment, please reference our
chamber-testing（.）com
Description and application
Ozone aging test chamber simulates and enhances the status of
ozone in the atmosphere, studies the effect of ozone on rubber, and
then identifies and evaluates the methods of rubber resistance to
ozone and aging, takes effective anti-aging measures, and improves
the service life of rubber products.JOEO ozone resistance test
chamber is mainly used for ozone aging resistance test of polymer
materials and products (rubber). Mainly used in rubber and plastic;
Automobile production; Wire and cable; Packaging materials;
Instruments and meters; Medical equipment; Civil nuclear energy;
Civil aviation; Colleges and universities; Research laboratories;
Inspection arbitration, technical supervision departments and other
rubber products.
Structure:
Usually, there is only one door in the secret room, and the
door on the left is open. It can also be made into a double door
(customized).
There is a *0mm diameter test hole on the left side of the
test box, equipped with a silicone rubber plug, which can be used
for external testing of power or signal wires.
There is a hollow heated anti frost observation window on the
door, which is resistant to high and low temperatures and is not
affected by fog. It has LED lights that turn on when in use and off
when not in use. The conventional observation window size is W**0 *
H**0mm. There are silicone rubber sealing strips on the door, which
are resistant to high and low temperatures, anti-aging, and have
good sealing performance. To prevent condensation or frost on the
door frame and edge during low-temperature testing, an electric
heating defrosting device is installed on the door frame and edge.
The door handle adopts a non reaction handle, with one hand opening
the door, making it easy to operate, safe and reliable.
The inner and outer chambers of the JOEO ozone test chamber
are made of SUS**4 and spray coated steel plates, respectively. The
inner box has buckles and multi-layer sample racks (please consult
sales for specific quantities), all made of **4 material. The outer
cavity is treated with sheet metal spraying, with beautiful color
and corrosion resistance.
The equipment outlet is located below the rear. After
connecting the water pipe, the water can be directly discharged
into the sewer without pollution.
The control panel is located on the upper left side of the
test box, and the conventional control is the PID touch screen.
Humanized operation, English operating system, customizable in
other languages, confirmation required before placing an
order.
The sound and light alarm system is located above the control
panel and has three colors: yellow (standby), red (alarm), and
green (running). When the device is in different states, the
corresponding indicator light will remain on.
Features:
JOEO Ozone test chamber equipment produces ozone gas by a
quiet and efficient ozone generator, and after a certain amount of
air is treated, the switch enters the test chamber in the mixture,
the continuous online ultraviolet detector detects the ozone
concentration, the ozone generator control feedback to the system,
the control system effectively controls the occurrence of ozone
according to the set value, so that the ozone chamber maintains the
appropriate working concentration. All test conditions are
satisfied through the heating and humidifying system.
Parameter
Model OAC - *0 OAC - **8 OAC - **0
Internal Dimension WxHxD (mm) **0x**0x**0 **0x**0x**0
***0x***0x**0
External Dimension WxHxD (mm) **0x***0x**0 ***0x***0x***0
***0x***0x***0
Temperature Range ( RT + *5℃ ) ～ + *5℃
Control Accuracy
of Temperature ±0.5℃
Distribution Uniformity
of Temperature ±0.2℃
Analytic Accuracy
of Temperature 0.1℃
Ozone Concentration(pphm) 1~***0 Can not adjustable
Deviation of
Ozone Concentration ≤*0%
Ozone Generator Silent discharge tube type
Inner and Outer Material Material of the inner box is SUS **4#
stainless steel,
of the outer box is stainless steel or SEE cold-rolled steel
with paint coated
Insulation Material Polyurethane rigid foam/ superfine
glass fiber cotton
Security Leakage, short circuit, over-current
protection
Power AC **0V; 1∮ 3 lines; *0/*0HZ
