Description
Application
JOEO IPX**6 rain test chamber, ip test chamber, water spray test
equipment Applied to plastics, rubber, paint, coatings, printing
ink, paper, pharmaceuticals, food, cosmetics, textiles, auto parts,
packaging materials, building materials, electricity and the
electrical products; it provide an important testing data for
scientific research, product development and quality control.If you
need more models about our test equipment, please reference our
chamber-testing（.）com
Description
When testing products in JOEO IPX**6 water spray test chamber,
place the sample on the turntable of the test chamber. After the
test chamber is started, the water flow is controlled by the
flowmeter and pressure, and enters the pendulum pipe through the
pipe. According to the test requirements, the pendulum tube swings
back and forth to pour water into the test object. the
pendulum tube swings *0° on both sides of the vertical line, a
total of **0°. It\'s *5 cents a stick. The test lasted five
minutes. Then rotate the case horizontally *0° and test for
5min.
Structure:
The door frame of the water spray chamber is insulated with
high temperature and aging resistant silicone rubber door seals,
the outer shell is coated with rust-resistant cold-rolled sheet,
and the outer box is made of SUS**4 stainless steel, which has a
long service life and is not easy to rust
The rotary table is made of SUS**4 stainless steel, which has good
corrosion resistance. The height of the turntable can be adjusted,
because the height of the test sample and the height of the
Spiracle must have corresponding fixed values.
JOEO rain spray test chamber swing tube is also made of **4
stainless steel. The swing tube drive adopts a stepper motor, which
has the advantages of low noise, fast speed, and accurate
angle.
The standard water tank of the rain testing equipment has an
automatic water intake function and is equipped with high and low
water level alarm detection, which can effectively prevent the
water pump from being damaged due to water shortage.
The stress free door handle can open and close the test door with
one hand, making it convenient and labor-saving.
Precautions
Rain test machine runs for a long time. If the water spray hole is
found to be blocked, the pipeline must be removed, rinsed with tap
water, and then assembled
After the equipment positioning is completed, it is necessary to
support the bracket to prevent the casters from being displaced due
to vibration during the equipment testing process.
If an unexpected sound is heard during operation, it is necessary
to stop the vehicle for inspection. After discovering and resolving
the fault, the machine can be restarted to avoid affecting the
service life of the equipment.
The transmission mechanism must be refueled regularly, and the
gearbox must be filled with clean *0 # oil.
