Description
Shenzhen Geelly Induction Technology Co, Ltd is a Shenzhen based
one stop induction heater producer. We are a professional in
induction heating machine with scientific research, design, own
production line and rich experience in various of heating
application. it is a State High-tech Enterprises By Ministry
of Science and Technology of China by 2001.
Circuit principle:
This series of equipment adopts MOSFET power device, input voltage
Single220V, Output frequency of the equipment up to 1500KHZ,
suitable for a variety of small parts heating applications.
the stability of the equipment is higher, volume is small ,
low loss, more energy-saving.
Technical parameter：
1ã€main model: GUF-06M-B and GUF-06BMA-B With
timer
2|.Maximum input power: 7KVA
3ã€Oscillating frequency: 500khz--1.1Mhz
4ã€Maximum input current：30A
5ã€Input voltage: single phase 220V,50 or 60HZ
6ã€Cooling water requirement: ≥ 0.2Mpa, ≥5L/min
7ã€Load continuation rate: 100%
8ã€GUF-06MA can control the heating time, Heating time, retain
time, cooling time:0.1-9.9s
2, Main application and
characteristics:
1) Small parts heating
2) Brazing small parts
3) Silver brazing of carbide saw blade
4) Heating resistant screw (nylok)
5) Steel wire, stainless steel wire continuous
heating
6) Powder smelting
7)It can heat and brazing minimum 0.5mm workpiece. The brazing
points are beautiful and delicate, the surface pattern will not be
damaged, the internal crystal structure of the metal wont be
changed.
3, Performance advantages:
1) Original core power components and chips, soft switching circuit
technology, Japanese or American potentiometer, Taiwan
Button, High Quality Air Hose, etc. , to ensure the quality of
equipment stability, equipment life is more than 8
years.
2) Can start and stop frequently.
3) Has multiple protection circuits such as over-current,
over-voltage, under-water, over-heat, frequency discomfort, etc.
.
4) With power, current, frequency display,
visual,more
convenient for making diffrent induction coils .
5)The whole machine runs stably, the failure rate is
lower.
6) Ultrahigh frequency induction heating equipment is
mostly used for brazing and surface heat treatment of industrial
metal parts.
7)Small volume, light weigh and energy saving (saving 70% than the
electron tube high frequency machine).
