Black color 60watt co2 laser power supply for 1200/1250mm sealed glass CO2 tube By Jinan Ruby Laser Technology Co., Ltd, China
Pas encore membre de TradeKey.com? Inscrivez-vous pour vous connecter avec 9 millions d'importateurs et exportateurs. Rejoignez-le maintenant c'est gratuit |
BOOK A CALL
Book Call On Your Favorite Time

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

Contact Us
Black color 60watt co2 laser power supply for 1200/1250mm sealed glass CO2 tube

Black color 60watt co2 laser power supply for 1200/1250mm sealed glass CO2 tube

71 ~ 81 / Piece ( Negotiable )

|

Minimum Order

Localité:

-

Prix de commande minimale:

Commande minimale:

50 Piece

Packaging Detail:

carton and foam

Delivery Time:

3-4 working days after payment received

Supplying Ability:

4000 Piece per Month

Payment Type:

T/T, D/A, D/P, Western Union

Contacter maintenant
Membre gratuit

Personne à contacter william

Jinan, Shandong

Contacter maintenant

Description

BR**0W CO2 POWER SUPPLIES
Feature
1.Both analog signals of 0 to 5V and PWM signals are used to control and regulate this AC**0V CO2 power supplys output laser power.
2.This AC**0V CO2 power supply can adopts ether external LCD digital display module by network cable,which can show HV carbon dioxid power supplys working current,working statues and failure code.  It is very good function for both machine factory and machine users
3.This BR**0W CO2 power supply uses ordinary H/L/P/G/IN/5V terminal block to input laser control signal and black steel case.
4.This LCD screen CO2 power supply has high efficiency and quick response with its zero current half bridge soft switching circuit. Thus it is easy to cooperate with most brand *0W co2 laser tube. 
5.This *0W CO2 laser power supply terminal control is simple and adapted to high and low level signals. TTL1level can be used to control the start and stop of laser power. At the same time, an abnormal protection switch was added to detect if the external water is ventilated or not.
6.The HV carbon dioxide power supply use one PCS fan for cooling. It use Japans bearing and make the fan works for very long time.
6.This HV carbon dioxide power supply has good grounding protection5.With advanced open circuit protection, the *0W CO2 power supply can work in an open-circuit state for a short time, which can avoid the damage of the LCD screen CO2 power supply caused by the bursting of the laser tube.
Specification
lnput  Input voltage AC**0V±*0% (AC**0V specified while order)
AC frequency *7~**0HZ
Maximum input power **0W
Maximum input current 2.2A
Output Maximum output voltage *5KV
Maximum output current *8mA
(depending on the laser tubes of different manufacturers)
Efficiency More than *0% (Full load)
Response speed Not more than 1ms
Control lnterace TTL multilevel switching control,effective level can be high and low selection (see control wining diagram)
Insulation lnput-output AC ***0V 1 minutes not more than *0mA
lnput-shell AC ***0V 1 minutes not more than*0mA
Output-shell Connection
Open Circuit Protection Can be short circuit (requires a good grounding shell,while avoiding the positive electrode and the shell between the arc)
Environmental Requested Working temperature **0℃~*0℃
Storage of temperature **0℃~*5℃
Relative Humidity Maximum *5%RH (non-condensing)
Altitude **0,**0 feet of work
**0,**0 feet of storage,dose not work
Cooling methods Forced air cooling (fan cooling)
Dimensions (LxWxH) **0mmx**5mmx**2mm
         
 
 

Send a direct inquiry to this supplier

To:

william < Jinan Ruby Laser Technology Co., Ltd >

Je veux savoir: