100W Portable home energy storage

Description

Charging function description：
 Charging is available for DC ***1 port *5V/2A charging and TYPE C port 5V/2A charging, while the DC ***1 port is compatible with solar DC *8V charging。
 When the charger is plugged IN to charge the product, the display will light up and display "In" flashing. The electric quantity will be displayed in a digital increasing way along with the product voltage。
 After the battery is fully charged, the display displays **0% and "IN" does not blink。
 When the charger is unplugged, the display will go off in 5 seconds and enter standby mode。
Function description of the wake up/On/Off button：
 When the device is in standby mode, click the power button (within 0.5 seconds). The display screen displays the current power in percentage (digital display). At the same time, open the USB output function, DC output function, wireless charging output function and TYPE-C output function。
 Click the power button (within 0.5 seconds) when the device is in standby mode, and the display screen will display the current electric quantity (digital display) according to the percentage. Then long press the key button of the headlamp for 2 seconds, the lighting headlamp will be on, press the key button of the headlamp again, the lighting headlamp will flash, press the key button of the headlamp again, the lighting headlamp SOS will blink, press the key button of the headlamp again, press the key button of the headlamp again, and press the key button of the headlamp again. Turn on the lamp function and press the key button of headlamp again to turn off the lamp。
 Press the power button in standby mode, and the display displays the current power supply in percentage. Hold down the AC output power button for 2 seconds, and the **0V and *0Hz displays on the display. The AC output indicator turns on blue (red if any fault occurs), and the **0V*0Hz AC output is normal. Long press the AC output switch button to turn off the AC output, and the **0V and *0Hz displays are off (the same is true for **0V*0Hz/**0V*0Hz).。
USB discharge function description：
 Press the power button, and the display will display the current battery by percentage. When charging other products at any USB-A port, the screen will display "⚡" symbol for 5V/2A ordinary charging. During output, the electric quantity will be displayed in a digital decreasing way along with the product voltage. When the product voltage is lower than *2V, the display displays 1% and blinks, indicating a low power alarm，
 When the voltage is lower than *1V, turn off the output and turn off the display。
 When this product charges electronic equipment, the electric current is less than **0mA±*0mA, and the output of the product is closed and entered standby state。
 When the USB output is short-circuited, the USB port shuts down the output. Press the power button again.
TYPE-C Indicates the output function：
When TYPE-C port charges other products, the screen displays "⚡⚡" symbol. It is a fast charge output, supporting 5V/3.5A,9V/2A,*2V/1.5A. When output, the electric quantity will be displayed in a digital decreasing way along with the product voltage.
When the voltage of this product is lower than *2V, the display displays 1% and blinks, indicating low power alarm.。
 When the battery voltage is lower than *1V, turn off the output and turn off the display。
 When TYPE-C charges electronic devices, the electrical current is less than **0mA±*0mA, and the output of the product is turned off and entered standby stat。
 When the TYPE-C output is short-circuited, the TYPE-C output is shut down and you need to press the power button again。