Description

Product description  The small blow film machine consisted of single screw extruder and film blowing tower, it is mainly used for testing the film blowing feasibility of polymer materials and the colloid status contained in the materials. The small blow film machine is refers to the technological process that the double-folded plastic film made by compressed air huffing, vane cooling and frequency conversion traction and the plastic melt being extruded through dies at a certain temperature and certain cutting force. Product overview Single Screw Extruder 1、Screw diameter：20 2、Length diameter ratio：1：28 3、Screw speed：0-95rpm frequency control 4、Screw material：It is made of 38CrMoAlA chromium-molybdenum steel. With the surface-layer processing of tempering, nitriding, chroming, polishing and super-precision grinding, the hardness HRC55~60, roughness Ra≤0.4μm, nitriding depth≥0.6mm. 5、Barrel material：It is made of 38CrMoAlA chromium-molybdenum steel. With the surface-layer processing of tempering, nitriding, chroming, polishing and super-precision grinding, the hardness HRC55~60, roughness Ra≤0.4μm, nitriding depth≥0.6mm. 6、Heating zone：Mica heaters in 3 areas of charging barrel and in 2 areas of handpiece. Each area has a copper cooling fin covered with security wind shield. 7、Cooling zone：Three groups of multi-wing fans to cool air quietly and strongly. 8、Quick change chuck：C-type snap ring coupling for fast and easy connection to the downstream equipment. 9、Drive motor：2.2KW Precision gear reduction motor. 10、Electronic control system：PID/LED/RKC intelligent digital temperature control, high-precision digital instrument display all extrusion parameters including temperature control, driving, pressure and interlocking spreading function. 11、Power：3∮，AC380V，50Hz, three phase and five line. 12、Dimension：1250x500x940 (W×D×H) mm（Not including adjustable type electric cabinet） 13、Weight：About 175kg Film Blowing Tower 1、Diameter of dies：30 2、Huffing air：Compressed air 0~6 bar 3、Cooling air：Blower flow 30L/min 4、Traction roller：80×L320mm 5、Winding roll：80×L320mm 6、Driving rolling speed：0.5~5m/min is adjustable 7、The maximum folded diameter of the thin film：150mm 8、Traction motor：90W 9、Winding motor：3.5N•m 10、Fan：0.25KW 11、Observations box：LED light source 12、Electronic control system：PID/LED/RKC intelligent digital temperature control, high-precision digital instrument display all extrusion parameters including temperature control, driving, pressure and interlocking spreading function. 13、Dimension：800×700×2050 (W×D×H) mm 14、Power：3∮，AC380V，15A 15、Weight：About 215kg