AC Resonant Test System for CVT By MK tester, China
Pas encore membre de TradeKey.com? Inscrivez-vous pour vous connecter avec 9 millions d'importateurs et exportateurs. Rejoignez-le maintenant c'est gratuit |
BOOK A CALL
Book Call On Your Favorite Time
Code
🗘

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

Contact Us
AC Resonant Test System for CVT

AC Resonant Test System for CVT

770 ~ 15397 / Set ( Negotiable )

|

Minimum Order

Localit:

-

Prix de commande minimale:

Commande minimale:

1 Set

Packaging Detail:

-

Delivery Time:

-

Supplying Ability:

-

Payment Type:

-

Contacter maintenant

MK tester

China

Membre gratuit

Personne à contacter wangcheng

Wuhan, Hubei

Contacter maintenant

Description

Product Introduction

Capacitive voltage transformer (CVT) in calibration the test must be conducted under the condition of *0Hz frequency complex geographical condition on site at the same time the traditional experiment device is difficult to meet the requirements of on-site handling testing series resonance booster device is first used in domestic field tunable resonance device has been widely used in domestic **0 kv and below the field calibration of capacitor voltage transformer.

 

Product Characteristics
  • 1、Due to full compensation of resonant reactive power the power of power supply and equipment is less than 1/*0 of the required capacity of the subject (1/Q>*0). Small size and light weight with the same capacity large output capacity of the device and small power capacity required cheap convenient and safe to use;

  • 2、Series resonance is actually a current filtering circuit so that the current passing through the subject is basically the fundamental current and the waveform distortion rate (THD) of the output voltage is very small which is superior to all existing ac voltage withstand equipment.

  • 3、The short circuit current of the sample after flashover or breakdown is only less than 1/*0 (1/Q) of the test current before short circuit which can effectively prevent the expansion of damage to the fault point after breakdown;

  • 4、After flashover the arc will be automatically extinguished immediately. The long (number of seconds) process of restoring resonant state voltage after arc quenching is a steady-state establishment process and there is no danger of voltage overshoot and no danger of restoring overvoltage in microsecond millisecond transient process.

Send a direct inquiry to this supplier

To:

wangcheng < MK tester >

Je veux savoir: