FOB Price
Obtenir le dernier prix0.35 ~ 16.9 / Meter ( Negotiable )
|Minimum Order
Localité:
-
Prix de commande minimale:
Commande minimale:
500 Meter
Packaging Detail:
as requests
Delivery Time:
within 5 to 7 days after get prepayment
Supplying Ability:
100000 Meter per Month
Payment Type:
T/T, L/C, Western Union, Money Gram, Other
Personne àcontacter Cathy
Xian, Shaanxi
Power cable: Type:VV, YJV, VV*2, YJV*2, VV*3, YJV*3
Production Range : 1.5mm2, 2.5mm2, 4mm2, 6mm, *0mm2,*6mm2, *5 mm2 , *5 mm2 , *0 mm2 , *0 mm2 , *5 mm2 ,**0 mm2 ,**0 mm2 ,**5 mm2 , **0 mm2 **0 mm2 **0 mm2 , **0 mm2,**0mm2
Application:
This product is suitable for power transmission and distribution under AC rated voltage 0.6/1kv and working frequency *0Hz lines.
Low Voltage power cable is used to transmit and distribute power in power transmission and distribution system of 1kV. It is generally applied to the fields including power, mines, construction, metallurgy, petrochemical industry and communication in complete replace of oil immersed paper insulated power cable.
XLPE insulated power cable
XLPE insulated power cable has a number of advantages than paper
insulted and PVC insulated cables. XLPE cable has high
electric strength, mechanical strength, high-ageing resistance,
environment stress resisting anti-chemical corrosion, and it is
simple construction, using convenient and higher operating of long
term temperature. It can be laid with no drop
restriction.
XLPE cable advantages:
XLPE cable have higher long-term working temperature and greater
current rating, and under the condition of the same environment,
XLPE cable may be reduced size (normal cross section) 1 or 2 class
in comparison with PVC cable. These are not only improving the
quality and properties of products, but also reduce cables\'
production cost.
Armoured Cable
Armored cable with steel tape to enhance the mechanical properties of the cable, the cable can withstand external mechanical pressure.
steel tape armor/steel
foil armoured,steel
wire armoured/steel
wire armoring/SWA.
Steel tape armored
cable models: VV*2, VV*3,
VLV*2, VLV*3, YJV*2, YJV*3,
YJLV*2, YJLV*3,ZR-VV*2,
NH-VV22,WDZ-YJV*2,
WDZ-YJV*3,WDZ-YJY*2
Please note that the above these cables could make to Antiflaming power cable, Fire resistance power cable, LSZH power cable in rated voltage 0.6/1 KV, PVC or XLPE insulated, PVC outer sheath.
The feature of the Antiflaming power cable: This cable is hard to be on fire, when it happens, the extend fire point just be limited to a certain range. It is applicable to power stations, subways, tunnels, high-rise buildings, large industrial and mining enterprises, oil fields, coal mines and other places with high density of cable laying
The feature of the Fire resistance power cable: This cable can not only transmit power under normal working conditions, but also when the fire or the combustion happens, can still maintain a certain time of normal operation . It is suitable for nuclear power plant, subway, tunnel, high-rise building and other places related to fire safety and fire rescue
The feature of the LSZH power cable: This cable not only has the flame retardant performance, but also has low smoke and harmless (less toxicity and corrosion), suitable for the cable flame retardant, smoke density, toxicity index and other places with special requirements, such as subway, tunnel, nuclear power plant
Flame retardant grade: ZC, ZB, ZA (IA)
Using Feature:
1, Cable conductor allowed working temperature doesn\'t exceed *0 ℃ in a long term
2, when the short circuit happened (the longest duration is no more than 5 seconds), the highest temperature of the cable conductor does not exceed **0 ℃.
3, The environment temperature should not below 0 ℃ when cable laying, To warm up first when the temperature lower than 0 ℃ .
4,The minimum bending radius of the multicore-non armoured cable shall not be less than *2 times of the outer diameter of cables, and the minimum bending radius of the mutilcore-armored cables shall not be less than *5 times of the outer diameter of cables. The minimum bending radius of the single core armoured cable shall not be less than *5 times of the outer diameter of cable, and the minimum bending radius of the single core -non armoured cable shall not be less than *0 times of the outer diameter of cable
