FOB Price
Obtenir le dernier prix1.4 ~ 1.8 / Square Meter
|Minimum Order
Localité:
-
Prix de commande minimale:
Commande minimale:
1000 Square Meter
Packaging Detail:
in roll
Delivery Time:
in 20 days
Supplying Ability:
60 Roll per Day
Payment Type:
T/T, L/C
Personne àcontacter Ms. Joanna
haibin industry park, Qingdao, Shandong
| Apperarance | Surface | Smooth surface without Nick,Crease,Bond; |
| Crystallite and watermarks | Crystallite Diameter exceed 2.0mm and Visible watermarks are not allowed. | |
| Visible defects (impurities, bubbles, oil, drop etc.) | Maximum *0 defects with each one diameter exceed 0.5mm were allowed per **0m | |
| Marks defects diameter exceed 0.5mm and mark the intensive defects area( within the **0mm diameter circle, *0 defects exist with each one diameter less than 0.5mm) as one defect. The defects's marks and places also should be listed in the parcking list. | ||
| Thickness & Size Tolerance | Tolerance(mm) | ±0.*2mm |
| Uniformity Ratio | At any two points from *5mm distance either horizontally or vertically of the thickness tolerance is less than *5μm; (or *0mm - less than *5μm; or **0mm - less than *0μm) | |
| Length & Width | ≥Normal Length / Width | |
| Roughness Rz (μm) | *5 **0 | |
| Moisture Content (%) | 0.*5 - 0.*5 | |
| Heat Shrinkage Rate ( *0ºC/*5min) (%) |
8.0 Max | |
| Pummel Value | 7 Max | |
| Light Transmittance (%) | *8% ± 5 | |
| Haze (%) | 0.2 - 0.4 | |
| Tensile Strength (MPa ) | *0.0 Min | |
| Tensile Elongation (% ) | **0 Min | |
| Yellowness Index (%) | *0 Max | |
