Description

CR***6 fuel level transmitter (sensor) working principle

The sensing part of the CR***6 series capacitive fuel level sensor is a coaxial container. When the fuel enters the container, the capacitance changes between the sensor housing and the sensing electrode. This change is converted by the circuit and is accurate. Linear and temperature compensated, output ***0mA standard signal is supplied to the display instrument.

CR***6 fuel level transmitter (sensor) performance indicators

● Detection range: 0.***5m

● Accuracy: 0.1, 0.2, 0.5

● Pressure range: *0.1MPa**2MPa

● Probe temperature resistance: ******0℃

● Output signal: ***0mA, ***0mA superimposed HART communication,

**5 communication, CAN bus communication

●Power supply voltage: ****8VDC (intrinsic safety type needs to be powered by safety barrier)

●Fixed mode: threaded mounting M*0×1.5, M*7×2, M*8×1.5, M*6×1

Flange mounting DN*5, DN*0, DN*0.

Special specifications can be customized according to requirements

● Probe diameter: Φ*2, Φ*6, Φ*5

●Explosion-proof grade: intrinsic safety ExiaIICT6 flameproof ExdIICT5

●Protection level: IP*5

●Intrinsic safety parameters: Ui: *8VDC, Ii: *3mA, Pi: 0.*5W, Ci: 0.**2uf, Li: 0mH

CR***6 fuel level transmitter (sensor) for occasions

CR****2 compact fuel level transmitter (sensor) industrial grade, suitable for 5MPA or below, temperature below **0℃, viscosity is not high fuel measurement, can be added with various protocols of communication

CR****1 automotive-specific fuel level transmitter (sensor) is suitable for the measurement of various fuel under normal temperature and pressure. The output damping time is adjustable from *0 to **0s. It can be equipped with **5 communication.

CR****2 standard fuel level transmitter (sensor) industrial grade, suitable for measurement below 5MPA, viscous fuel quality below **0℃, can be added with various protocol communication

CR****3 high temperature and high pressure type fuel level transmitter (sensor) industrial grade, suitable for below *2MPA, temperature measurement below **0℃, can be attached to various protocols

CR****1 universal fuel level transmitter (sensor) is suitable for measuring various fuel and hydraulic fuel under normal temperature and pressure, and can be equipped with **5 communication.