Description
Package
Included
1pcs *0A LCD Solar Charge Controller
1pcs English User Manual
1.
*2/*4V system automatic detect..
2.
LCD screen display.
3.
DC *2V & USB 5V charging for DC lamp and phone.
4.
Easy operation interface, parameter user can reset.
5.
PWM charging mode (SOC).
6. Built-in industrial
microcontroller.
7. Built-in short-circuit
protection,open-circuit protection,reverse protection,over-load
protection.
8. Dual MOSFET Reverse current
protection, the low heat production.
|
Specification |
|
Nominal output |
*2V/*4V |
|
Max charge current |
*0A |
|
Max load current |
*0A |
|
Max solar panel |
＜*0V |
|
Charge voltage |
*3.7V |
|
Discharge stop |
*0.7V |
|
Discharge reconnect |
*2.6V |
|
USB output |
5V/2A |
|
Self consumption |
|
|
Size |
**8**5**0mm |
|
Operating temperature |
**0 to **0℃ |
|
Net weight |
**0g |
SAFETY
INSTRUCTIONS:
1.
Make sure your battery has enough voltage for the controller to
recognize the battery type before first installation.
2.
The battery cable should be as short as possible to minimize
loss.
3.
The regulator is only suitable for lead-acid batteries: OPEN, AGM,
GEL. It is not suited for nickel metal hydride, lithium ions or
other batteries.
4.
The charge regulator is only suitable for regulating solar
modules.
5.
Never connect another charging source to the charge
regulator.
SYSTEM CONNECTION
SYSTEM CONNECTION:
1. Connect the battery to the
charge regulator - plus and minus.
2. Connect the solar panel to
the regulator - plus and minus.
3. Connect the consumer to the
charge regulator - plus and minus.
The reverse order
applies when de-installing!
An improper sequence
order can damage the controller!
