Description
Curved thin-walled tubes are bent, and the rotating bending method
is advantageous for use. The accuracy of bending the tire amount
will affect the quality of the bent pipe to some extent. In the
production process, in addition to the size of the specification,
it is also necessary to control within a certain tolerance
range.
The elbow requires the user to select the appropriate bending of
the tire according to the bending diameter of the tube during use.
The material itself has flexibility, and surface corrosion can
affect the quality of the elbow to some extent.
During the construction process, the operator needs to know the
material of the pipe being treated.
Due to the difficulty of designing a special mandrel during the
manufacturing process, the entire device is not easy to operate.
Due to oil, traditional oil-based lubricants are limited in their
application.
The base lubricant is fluid and very difficult to clean.
This will, to a certain extent, pollute the production environment,
work and working conditions. Eliminating these pollutions requires
a lot of capital, manpower and material resources, and can reduce
or even avoid the human and material resources of the
above-mentioned pollution removal.
## # In the traditional elbow production process, in order
to obtain a better curved pipe surface quality, a variety of
methods will be used in the process of use, using a more advanced,
higher-grade pipe bending machine, higher - using a strong
mold.
Or use a lubricated product.
The pipe bending machine has certain requirements on the use
environment during use. The ambient temperature is too high, which
directly causes the pipe bender to enter the air to overheat, which
makes the heat dissipation of the device more serious.
difficult.
Cooling measures are required.
If the fan inside the bender is damaged or installed or not
installed, you will need to install it in the correct way. Damaged
fans need to be repaired or replaced in a timely manner. The
bearings in the equipment are damaged or excessively worn.
The rotor and stator are rubbed against each other.
The windings of the bending machine are wired incorrectly, so the
star will be connected to the triangle and the device will operate
at rated load, which effectively overheats the device. The
processing of the equipment is very fast and convenient, and it is
a metal object.
The best choice for chamfer cutting.
The pipe bending machine needs to be refueled strictly according to
the lubrication requirements before work, effectively maintain the
normal operation of the gear chamfering oil, and effectively check
the safety device. Regardless of whether the various operating
handles in the appliance are safe and reliable, the holes can be
operated for 5 minutes.
After that, you can use it after confirmation.
