FOB Price
Obtenir le dernier prix4 ~ 9 / Barrel
|Minimum Order
Localité:
-
Prix de commande minimale:
Commande minimale:
20 Box
Packaging Detail:
0.5 1 2L
Delivery Time:
15days
Supplying Ability:
1000 Box per Day
Payment Type:
T/T, L/C, Western Union, PayPal
Personne àcontacter Ms. Deng
baiyunshijin town dagang 19, Guangzhou, Guangdong
Fast Wax is 3 inch 1 wax
Introduce
Used for all car surface paint film
cosmetic polishing, defect repair, glazing maintenance. Especially
suitable for high-grade paint film.Can fast repair high paint
surface(clear) in case of defects due to operational errors,
etc.
1. Fast move polish Scratch ,repair
Paint surface by P***0sanding paper
2. Remove dust particles from the
surface of the paint film, sag, excessive paint, dried tangerine
peel, etc.
3. Repair the old surface layer that
has been oxidized by the paint film, restore the gloss of the paint
film
USE
1):First clean the car to be waxed
(partially polished, you can clean the range that needs to be
polished)
2): If want for deep scratches,
first polish the 3M P***0 water sandpaper, then clean by the water
or wet towel.
3)Wipe the wax evenly with a sponge
ball (****3) in the position where it needs to be waxed. (If it is
waxing the whole car, the whole car should be divided into multiple
areas for operation. Since the wax is easy to volatilize, if the
whole car is rubbed, it will affect Waxing effect, dust phenomenon
occurs, improper operation leads to the appearance of
lacquer)
4)With the polishing machine sponge
disc (****6), it is not allowed to use wool products such as wool
balls or rabbit hair balls. The sponge surface must be clean and no
other wax or debris can be used.
5)The fastest speed of the polishing
machine is recommended in the fifth gear (speed within ***0~***0
rpm)
6)Until the wax is completely
collected, the brightness is out, and the scratch is smoothed
before the next partial position is applied.
7)In particular, do a full car
polishing process. If you need to do mirror reduction (****8)
sealing glaze (****3), you should clean the residual wax on the
surface before you can do the next step.
