Hot selling high pressure pneumatic liquid booster pump for various industry

Description

Product Description:
TEREK pump adopt aluminum alloy and stainless steel materials , We offer the most complete range of models in the industry measured Such as :Capability of ultimate pressure, flow or output horsepower. Compatibility with a broad variety of liquids ,such as oil ,water, corrosive liquid and chemical liquid applications. High quality seals, long service life available.. LAD Series are double acting and single driven head type. They have less pulsations and deliver approx *0% more flow than the single acting LKA pumps. The diameter of drive plunger is *0mm.
Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is reciprocating , The automatic reciprocating motion of the piston is controlled by a built-in four-way valve. TEREK pumps are air driven at a drive air pressure of 2 to 8 bar (*9 to **6 psi) by the normal air compressor. Provide maximum operating pressure up to ***0bar.
TEREK pumps feature is a large air piston joint to a smaller diameter piston. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios. TEREK model reflect the pumps nominal pressure ratios, while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal liquid pressure can be calculated.

Product parameters:

Type	Pressure ratio	Max outlet pressure  (bar)	Max flow   (L/min)	Connection size(inch)Drive	Connection size(inch)   Inlet	Connection size(inch)   Outlet
LAD*0	*0:1	**0	4.*9	G3/8	NPT 1/2	NPT 3/8
LAD*4	*4:1	**2	2.*2	G3/8	NPT 3/8	NPT 3/8
LAD*4	*4:1	**2	1.*8	G3/8	NPT 3/8	NPT 3/8
LAD**0	**0:1	**0	1.*1	G3/8	NPT 3/8	NPT 3/8
LAD**0	**0:1	***0	0.*9	G3/8	NPT 3/8	M*4*1.5

The indicated flow maximum capacities is the maximum value which can be reached at an outlet pressure of 0 bar and an air drive of PL = 6 bar.
Max outlet pressure at an air drive of 8bar/**6psi
In order to extend the lifetime of the booster pump, The driving air pressure should not be higher than 8bar.

Key features include:
1.Compressed Air driven - no electricity required (connect to normal air compressor)
In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar
2. High output pressure, No airline lubricator required
3. The pressure of the output liquid is easy to adjust, just adjust the input pressure.
4.Wide range of models with different ratios
5. High quality seals, long life service available
6.Easy to install, operate and maintenance.
7. Can be customized system in accordance with the standards of customer requirements
8. Gas drive, No heat、flame or spark risk and explosion proof
9.Automatic pressure holding, whatever the cause of the pressure drop, the pump will automatically start, keep the loop pressure constant
*0. All components of the contact with the gas are made of aluminum or stainless steel

Applications include:
1、Hydrostatic pressure tests and blasting test for valves, pipe and tubes, pressure vessels, pressure switches, tanks, hoses, pipes and tubing, pressure gauges, cylinders and etc.
2.Safety valve and water pressure testing.
3.Automobile brake system and nozzle test.
4.Injection of chemical reagents in a pipe or other instruments
5. Pressure testing of high pressure liquid systems and instruments.
6. Performance test and calibration of instrument and meter.
7.Mining, oil field and fire & safety Application of these field
8.Increase the strength of clamping, forming, drilling, cutting, stamping, etc.
9.Precision lubrication and spraying
*0.Liquid transfer and liquid recovery
heme-font:minor-fareast;mso-fareast-theme-font: minor-fareast;mso-hansi-theme-font:minor-fareast'>9.Automatic pressure holding, whatever the cause of the pressure drop, the pump will automatically start, keep the loop pressure constant
*0. All components of the contact with the gas are made of aluminum or stainless steel

Accurate selection:
How to Select Air Driven Liquid Boosters/Systems?
In order to choose the accurate and appropriate booster pump or systems for you,
Please kindly reply us the following questions:
1. What is the current pressure of the liquid ? (    )bar
2. What kind of liquid needs to be pressurized ?  Such as oil ,water, corrosive liquid and chemical liquid ?
3.What is the output pressure of the liquid you want?(    )bar
4.What is the driven air pressure ( Your air compressor) you can provide ?(    )bar,
Because our booster pump is completely air driven and no need any electricity
5.How much of the outlet liquid flow rate do you need?(    )L/min
6. What is its purpose or application field you used it?  Thanks
e-font: minor-fareast;mso-hansi-theme-font:minor-fareast'>9.Automatic pressure holding, whatever the cause of the pressure drop, the pump will automatically start, keep the loop pressure constant
*0. All components of the contact with the gas are made of aluminum or stainless steel