❯

BOOK A CALL

Book Call On Your Favorite Time

I'm a Buyer I'm a Supplier

🗘

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

Fibered Emulsion Damp Proofing

FOB Price

Obtenir le dernier prix

Minimum Order

Localit�:

Prix de commande minimale:

Commande minimale:

Packaging Detail:

Delivery Time:

Supplying Ability:

Payment Type:

Contacter maintenant

AL SAFI CHEMICALS INDUSTRIES L.L.C

UAE

Membre gratuit

Personne Ã contacter Mr. Muhamed

Muwailah, Sharjah, Sharjah

Contacter maintenant

Description

Surface should be free of oil, grease, dirt, laitance and loose material. Dry surfaces may be dampened with water before application. Repair all cracks and holes with ZOLVTEK Fibered Emulsion Damping and with Fiberglass Film or with Bitumen Saturated Cotton Fabric, before applying the surface coating.

• Waterproofing of flat, exposed and pitched roofs as well as kitchens, bathrooms and basements.

• Damp- proofing of concrete basements, walls, floors, block work walls etc.

• Protection of concrete foundations, footings, retaining walls etc. from soil chemicals

Fibered Emulsion Damp Proofing

ZOLVTEK Fibered Emulsion Damp proofing is an all purpose coating, especially made with superior Bitumen, clay emulsifiers, and selected non- fibers. The dried film

cures to a tough, flexible, durable finish and will resist variations in temperature and weather. ZOLVTEK Fibered Emulsion **9 ZF Damp proofing will not burn or support

combustion in a liquid state. It has no odor or fumes, and resists the absorption of exterior moisture. ZOLVTEK Fibered Emulsion **9 ZF Fibered Emulsion Damp proofing

may be applied to slightly damp surfaces. Fibered Emulsion Damp proofing is a vapor retarder used as a protective coating against humidity on the exterior face of interior walls in cavity wall construction and exterior surfaces of concrete, metal and wood above or below grade. It may also be applied to interior surfaces in the absence of hydrostatic pressure. The emulsion may be utilized as an adhesive for polystyrene insulation prior to backfilling.

ZOLVTEK Fibered Emulsion Damp proofing is easily applied by brush, roller or spray equipment. Apply ZOLVTEK **9ZF Fibered Emulsion Damp proofing in one coat. If applying two coats, allow the first coat to dry. Coating should be continuous and free of pinholes and breaks. Cover all slots, joints and grooves and apply into all chases and corners. Above-grade damp proofing (interior and exterior): Apply one coat of ZOLVCOAT or Non-Fibered Emulsion Damp proofing at a rate of 2 to 3 gallons per **0 sq. ft. If applying two coats, each coat should be 2 to 3 gallons per **0 sq. ft. (First coat

must be allowed to dry prior to the application of the second coat).

Below-grade damp proofing (interior, exterior and cavity walls):

Apply one coat of ZOlVCOAT Non-Fibered Emulsion Damp proofing at a rate of 2 to 3 gallons per **0 sq. ft. If applying two coats, each coat should be 2 to 3 gallons per **0 sq. ft. (First coat must be allowed to dry prior to the application of the second coat.)

Fabric re-enforced damp proofing: Apply one coat of ZOLVCOAT or Non-Fibered Emulsion Damp proofing at a rate of 2 to 3 gallons per **0 sq. ft. Apply any Fiber Glass

Membrane or any Bitumen Saturated Cotton Fabric over the wet coating, overlapping all edges. Smooth out all wrinkles, making sure there is no trapped air underneath the fabric. Proceed with second coat at a rate of 2 to 3 gallons per **0 sq. ft. Polystyrene insulation adhesive: ZOLVCOAT O or any Non- Fibered Emulsion Damp proofing is a water-based Bitumen emulsion that is **0% compatible with polystyrene

insulation or protection board. As an adhesive, ZOLVCOAT or any Non-Fibered Emulsion Damp proofing should be applied in 4 diameter dabs directly to the insulation and immediately pressed into place. When more than two courses are required, wall ties may be required. Let the film to cure for a minimum of *4 to *8 hours prior to backfilling. Care should be taken during backfilling not to puncture or damage the coating. A protection board is highly recommended and backfilling should take placewithin a week.

FEATURES AND BENEFITS

ZOLVTEK **9 ZF is a fiber reinforced bitumen emulsion
specially developed for high temperature services.
On drying it forms a firm, flexible and continuous coating
with good adhesion to screed, concrete, fiberglass mat etc.
The fiber content prevents the coating from sagging or
flowing even at the extreme temperatures, which roofs
and other parts of the building reach in number.
Suitable for use in both dry and damp surface.
Easy to apply
Ready for use; no mixing or heating required.
Good weather resistance
Does not brittle at low temperatures.
Good resistance to soil acids and salts.

PACKING AND STORAGE

Available in *0 Liters per pail and **0 Liters/drum. Minimum of *2 months in sealed original containers under recommended storage conditions. Coating must be dried

before exposure to water. Store in a heated room and keep container covered when not in use. Do not thin.

TECHNICAL DATA ZOLVTEK Z9 ZF complies with the specifications of ASTM D**7
TEST	SPECIFICATION
Color	Black
Solids by Weight	*2% Nominal
Solids by Volume	*9% Nominal
Weight per Gallon	9.2
Service Temperature	Limit
0 to 0°C	Density
1.**0 kg/liter	Non-Volatile Content
Min. *0%	Flammability
No tendency to flash or ignite	Permeability
0.5 perm	Chemical and water
resistance	Excellent resistance to water
vapour, salt water, dilute acids,	& alkalis
Toxicit y	Non Toxic
Cure Time	4 to 8 @*******************

Fibered Emulsion Damp Proofing

AL SAFI CHEMICALS INDUSTRIES L.L.C

Description

Send a direct inquiry to this supplier

To:

Je veux savoir:

Fibered Emulsion Damp Proofing

AL SAFI CHEMICALS INDUSTRIES L.L.C

Description

Send a direct inquiry to this supplier

To:

Je veux savoir:

Get Verified Buyers & Suppliers

Avail Free Consultation