Description
Product Description : LDPE
1. Blow molding grade,
2. Injection molding grade,
3. Film grade;
4. Extrusion grade.
Application of LDPE Low Density Polyethylene:
LDPE(low density polyethylene) - is used in products and
packaging such as plastic bags, milk jugs, detergent bottles,
margarine tubs, garbage containers, water pipes, woven bag,
raincoat, polyethylene monofilament, woven yarn etc...LDPE resins
are made by high pressure autoclave process and mainly used for
blown film extrusion and wire coating (cable sheath) etc...They are
widely used for applications for general purpose packaging films,
heavy duty bags, shrink films, and foams.
2. Specifications
Flame resistance material for HDPE pipes
This is the raw material for producing pipe
Grade: PE**0/PE *0
Anti-flame,
High density polyethylene for non-toxic, tasteless, no smelly white
particles, melting point is about **0 ° C, relative density of
0.**1 ~ 0.**0. It has good heat resistance and cold
resistance, chemical stability, but also has high rigidity and
toughness, good mechanical strength. Dielectric properties,
environmental stress cracking resistance sex also is good.
3. Application:
Make barrela, plastic bottle and bag, make all kind of pipes, make
shading net, and make cable wire-insulating
4. Storage:
Shelf life: It should avoid damp, contaminated and direct sun light
during transport. And should be stored in ventilated and dry place.
Do not put it with flammable and corrosive substances together, and
away from the fire.
