FOB Price
Obtenir le dernier prix4.6 ~ 5.8 / Kilogram ( Negotiable )
|Minimum Order
Localité:
-
Prix de commande minimale:
Commande minimale:
200 Kilogram
Packaging Detail:
1kg/drum, 5kg/drum, 10kg/drum, 20kg/drum, 25kg/drum, 200kg/drum
Delivery Time:
7days
Supplying Ability:
120 Ton per Month
Payment Type:
T/T, L/C, Western Union
Personne àcontacter Sarah
Dongguan, Guangdong
GS-C*5 **0:2 liquid silicone for delicate concrete silicone mold
1.Description of GS-C*5 concrete mold making silicone rubber
GS-C*5 Silicone rubber is tin cure silicone rubber for mold making.It is liquid rtv*2 silicone rubber for mold making for stone mold .The silicone rubber will be cured under room temperature, Its two-components, the mixing ratio is **0:2 . Part A is a flowable liquid silicone , part B is the catalyst. It has an exceptional fluidity and good operability.
2.Characteristics of GS-C*5 mold making silicone rubber
*An
exceptional fluidity and good operability, easy to demold
*Good tensile strength and tear strength
*soft hardness
*copy detailed pattern
*good flexibility
*eco-friendly
*long shelf-time &lifetime
3.Application of GS-C*5 concrete mold making silicone rubber
GS-C*5 silicone rubber is perfect molding material., it is suitable to make mold for concrete stone, cement casting , gypsum decocations, plaster product, resin craft, soap,candle, bronze casting, wax, crystal, tyre mold ,shoe mold ,clay casting ,soap mold,ceramic casting ,etc..
GS-C*5 Silicone rubber is mainly suitable small size produce and small size concrete product with complicate pattern.
4. Using instructions of GS-C*5 concrete mold making silicone rubber
Step
1: prepare and clean the prototype.
You must make sure your original molds perfect. fix the original
mold on a board , then using some assistant material(like
cardpaper) to make a frame for to surround the prototype. The frame
is no need ,if we make the mold by brushing way .
Step
2: Take the silicone and catalyst as the ratio **0:2
(silicone:catalyst=**0:2) ,mix the silicone rubber and catalyst
evenly.
*Notes: Molding silicon rubber is a kind of flowing liquid and it
contains two parts. Part A is a kind of flowing liquid and part B
is the curing agent. Remember to mix part A and part B evenly,
otherwise the silicon rubber will be partly solidified and this
will bring troubles for your final operation. Whats more, the
finished molds will have a short life. All of these will cause a
waste of silicon rubber.
Step 3: Vacuum pumping
After mixed the silicone evenly, it is better to release the bubble by Vacuum pumping.
Step 4: Pouring cast or brushing cast
After
released the bubble, we can pour/brush the silicone rubber on the
prototype
*Notes:Please finished all the steped within the operation time .If
not it will cause cross linking reaction, and no more further steps
will be available.So,we have to pay attention to the pot life and
curing time.
5. Package and shelf life of GS-C*5 concrete mold making silicone rubber
Package
1kg/drum,5kgs/drum,*0kgs/drum,*5kgs/drum,**0kgs/drum.
Shelf life and transportation
1. Twelve(*2) months when stored at *5C in tightly closed original
packages.
2. This kind of product is non-dangerous product, which could be
transported as general chemicals.
Any questions, pls feel free to contact us , it will be our great pleasure at service for you:
E-mail: *@********************span>
Mobile: ***************0
Whatsapp: ***************0
