Description
Our spraying equipment has the following types:
1)Airless spraying machine series
2)Air spraying ,static spraying equipment series
3)Thermal spraying equipment series
Airless spraying equipment
Model LGPQ/LQPT Heavy-duty anticorrosion and industrial high
pressure cseries
Airless spraying equipment, with compressed air as its power, is
suitable for all places of compressed air with pneumatic or
mechanical power head ,which is subdivided into vertical,
wall-mounted, portable, car-style, elevation type ,and so on.
1, Spray long-term anti-corrosion paints, such as: thick paste type
epoxy asphalt coatings, modified epoxy coatings, epoxy natural gas
micaceous oxide iron coatings, high solids solvent-free epoxy
coatings, super-epoxy paints, polyurethane paints and other new
high-performance coatings;
2, Spray a variety of common coatings, such as: chlorinated rubber
coatings, phenolic paints , alkyd paints, amino paints, nitro
paints, acrylic paints, latex paints, architectural coatings,
etc;
3, Also can be used to mine and other places with a greater gap to
go along the hi-pressure transportation of fluid.
Model LGPQ Airless paint sprayer series apply to ships,
automobiles, railway vehicles, containers, pipes, tanks, bridges,
water gates and other large components of the coating.
| Contrast table of pressure ratio, dimension of
common model |
| Model |
LGPQ6C |
LGPQ7C |
LGPQ9C |
LGPQ*8CS |
LGPQ*1CS |
LGPQ*2C |
LGPQ*3CB |
LGPQ*4CBX |
LGPQ*0C |
| Pressure ratio |
*5 :1 |
*5 :1 |
*2 :1 |
*6 :1 |
*2 :1 |
*5 :1 |
*6 :1 |
*2 :1 |
*6 :1 |
Displacement
(L/min) |
*5 |
*5 |
*1 |
*9 |
*7 |
*3 |
*0 |
*7 |
*1 |
Gas source
(0.6MPa) |
0.6MPa,
<***0L /min |
0.6MPa, >***0L/min |
| Weight(kg) |
*5 |
*6 |
*5 |
*3 |
*3 |
*8 |
*9 |
*5 |
*7 |
| Dimension(mm) |
**0***0***0 |
**0***0***0 |
**0***0***0 |
**5***5***5 |
**5***5***5 |
**5***5 |
Model LGPT Airless spraying machine series feature:
Airless spraying equipment ,with compressed air as its power,
adopts new type commutation power head of stability ,reliability,
low features rate ,small pressure fluctuation ,even film ,good
coating quality.
1,Features long journey, large displacement, low commutation
frequency, difficult to wear, long life and long maintenance
cycle;
2,Adopt new mufflers of exhaust noise as low as ****0dB;
3, Features small car type, compact structure, easy motion;
4,Adopt to spray thick slurry type high viscosity coatings and the
whole common coatings and satisfy the demand for heavy-duty.
Typical application of Model LGPT Airless spraying machine
series:
ships, automobiles, railway vehicles, containers, pipes, tanks,
bridges, water gates and other large components.
| Contrast table of pressure ratio, dimension of
common model |
| C |
LQPT***8C |
LQPT***8K |
LQPT***2C |
LQPT***0C |
| Pressure ratio |
*5 : 1 |
*5 : 1 |
*5 : 1 |
*6 : 1 |
| Displacement(L/min) |
*8 |
*8 |
*2 |
*0 |
| Gas source(0.6MPa) |
0.6MPa, < ***0L /min |
| Weight(kg) |
*7 |
*8 |
*0 |
*2 |
| Dimension(mm) |
**0***0***0 |
**0***0***0 |
**5***5***5 |
**5***5***5 |
We have the best ranks of assembly, adequate stand-alone
inventory, strict test before leaving the factory , full
preparation for the user.
Model ASM Heavy-duty anticorrosion and industrial high pressure
airless spraying
Common coatings: phenolic, alkyd resins, polyurethane,
architectural latex paint and high viscosity coating;
Heavy-duty coating: epoxy zinc-rich primers, epoxy micaceous iron
intermediate paints, polyurethane paints, chlorinated rubber
paints
Typical application:
Spray the paints for watercrafts, automobiles,
rail trucks, containers, pipes, storage tanks, bridges, water gates
and other large-sized structural
members. |
|
Contrast table of pressure ratio, dimension of common model |
Model |
ASM***1 |
ASM***1 |
ASM***1 |
ASM***1 |
ASM***1 |
ASM***1 |
Pressure ratio |
*3 : 1 |
*8 : 1 |
*2 : 1 |
*6 : 1 |
*5 : 1 |
*8 : 1 |
Weight (kg) |
*3 |
*5 |
**0 |
**0 |
*6 |
*3 |
Dimension(mm) |
*3 × *5 × **5 |
*3 × *5 × **7 |
*5 × *0 × **5 |
*5 × *0 × **5 |
*3 × *5 × **5 |
*6 × *3 × *8 |
Flux(L/min) |
*1(2GPM) |
*1(2GPM) |
*8(7GPM) |
*2(8GPM) |
*2.5(3GPM) |
4(1GPM) |
Most pressure |
**0bar |
**2bar |
**6bar |
**7bar |
**0bar |
**6bar |
Air pressure |
**6.2bar |
**6.2bar |
**6.2bar |
**6.2bar |
**6.2bar |
**7bar |
Cycle number/min |
*0 |
*0 |
*0 |
*0 |
*0 |
*0 |
Journey
/dia. outlet
(mm) |
**0 |
**7 |
**0 |
**0 |
**0 |
**0 |
Spreading equipment series
HG*1. Cab be used to spread different kinds of liquid sealant on
end face, threads and welds of mechanical components on assembly
line for small or big batch production. |
| Model |
LGN*4C |
| Pressure ratio |
*8:1 |
| Displacement(L/min) |
*0 |
| Gas source |
0.6MPa ***0L/min |
| Weight (kg) |
*7 |
| Dimension(mm) |
**0***0***0 |
|
Model JYT***8B Spreading machine
With single or double air-driven riser and a pressure plate.
The unit features machine control direction change.
Designed for coating every kind of new type high performance
insulating sealant, as well as transferring sealant and
greases. |
ModelQYT**8JYT****8BPressure ratio*6:**5:1Single-pass
displacement0.*8L/min0.*8L/minGas source0.6MPa ***0L/min0.6MPa
***0L/minWeight(kg)****6Dimension(mm)***0***0********0***0****0Dia.of
platen(mm)∮**5mm∮**5mm
Model SYT*4 Two-component pressure plate type spreading
machine:Dedicated to design for spread two-component polysulphide
sealant and two-component silicone structure glue.Both master pump
and assisted pump adopt mechanical commutating power unit.Typical
application: hollow glass and curtain wall glass
| Model |
SYT*4 |
| Pressure ratio of pump A |
*5:1 |
| Pressure ratio of pump B |
8:1 |
| Mixing ratio |
7:***3:1 |
| Spreading quantity |
****5kg/h |
| Gas source |
0.6MPa ***0L/min |
| Quality |
**0kg |
| Dimension |
***0mm****0mm****0mm |
| Dia. of platen |
A∮**0mm B∮**5mm |
Two component airless spraying machine
Dedicated to design for spread two component polysuphide sealant
and two component silicone structure glue Both master pump and
assisted pump adopt mechanical commutating power unit Typical
application: hollow glass and curtain wall glass
Two-component spray unit , with high pressure ratio, wide component
ratio and broad range of application. More easy to spray and meter
two-component paint. Can spray various two-component , high
performance and corrosion-resistance paint .
High viscidity spray unit adopt airless pressure feed and
air-assisted atomizing to spray .Applicable to spray high viscidity
and bad fluidity material, and even can spray new type material
which contains The component of short fiber and small grain,
including thermo-insulating and sound-deadened coatings, such as
asphalt asbestos and asphalt rubber.Typical application: steering
room of automobile, locomotive and cabin.
Shanghai Liangshi introduction:
Shanghai Liangshi Company, established in ***3, is the the largest
and strongest manufacturer of surface treatment and coating
equipment in China. We specialized in researching, designing,
manufacturing and sales of painting and blasting machine. Not only
single coating equipment, also we can provide the customer with
spare parts and the whole solutions of production line such as
layout and design of the complete set of system equipment(like
pretreating, degreasing, air filtering/processing, drying, blasting
and painting line).
Our leading products: Sand/shot blasting equipment, sandblasting
room, sand/shot blaster, shot peening machine, automatic blasting
robot, paint/powder/oil/wire sprayer equipment, painting machine,
vanishing chamber, sand sucking machine, enameling equipment,
dehumidifier, freeze drier, rear cooler, air compressor, oven and
oven tunnel, vary kinds of non-standard automatic blasting/
spraying line, pressure equipment, pressure vessel/tank, spare
parts of equipment.
