FOB Price
Obtenir le dernier prix10 ~ 500 / Piece
|Minimum Order
Localité:
-
Prix de commande minimale:
Commande minimale:
2 Piece
Packaging Detail:
custom made
Delivery Time:
15 days
Supplying Ability:
10000 Piece per Year
Payment Type:
T/T, L/C, D/P
The Thin Section Angular Contact Ball Bearings(A Type) are mainly
applied to support both radial load and single direction axial
load. It needs to be installed in pairs if applied to support
double direction axial load through the way of Face to Face
installation (DF), Back to Back installation (DB) and Tandem
installation(DT).
The difference between the Thin Section Radial Contact Ball
Bearings (C Type) and the Thin Section Angular Contact Ball
Bearings (A Type) is that the Thin Section Angular Contact Ball
Bearings have big enough radial clearance that causes a contact
angle to bear the axial load. The degree of the standard contact
angle is *0.
The bore diameters of our Angular Contact Bearing range from 1.**0
inch to *0.**0 inch. Series range from 0.***5 X 0.***5 inch to
1.**0 X 1.**0 inch in cross section. In these series, the material
of rings could be GCr*5 and stainless. By using the same series of
thin-section bearings throughout a products line, the designer
could standardize on common components.