Description
CTO Carbon Block machine components
first part Automatic Mixer.
1set
Total power: 3kw
Net weight: **0kg
D=**0mm.H=***0mm
It could mix Active carbon and PE glue automatically
second part
Automatic feeder
1 set (Automatically)
Power:1.5KW
Auto Feeding raw material into extruder at third part.
Net Weight:*5kg
third part
Extruder (intelligent)
1 set
total power: 9.5KW
Motor power: 5.5kw,
Heating power: 4kw
Net Weight:**0kg
**0mm****0mm****0mm
forth part
Working table
1set
A circular cooling system on working table Including vacuum
pump.
Their material is Stainless steel.
Power: 0.*5KW.
fifth part
Cutting machine
1set
Power:2.2KW
Semi automatic cutting machine.
Dust collection could collect dust when cutting machine is
running,
You could use the dust as raw material.
Parameters
Production line could work *4 hours without a break.
Rated Power:*6.*5KW/set
Running power: 8kwh per hour when machine is running.
Inner diameter of carbon block: *0mm (Default)
Outer diameter of carbon block : *3mm (Default)
Length of carbon block: 5, *0, *0…
Inner diameter of CTO filter that we can supply: 9mm~*0mm
Outer diameter of CTO filter that we can supply:
*9mm~**0mm
Raw Material: Active carbon (granule) and LDPE Binder(Powder)
Percentage of carbon is *8%~*0% active carbon , Percentage of PE is
*0%~*2%.
Production capacity: 1pc per minute
Note: One Extruder just makes one kind of inner diameter and outer
diameter. If you want to do different diameter(≤*5mm), you should
replace some parts of extruder(Mold, screw rod and barrel). If
diameter is larger than *5mm, We suggest you buy a big extruder
with bigger gear box and bigger motor…
