FOB Price
Obtenir le dernier prix( Negotiable )
|Minimum Order
Localité:
-
Prix de commande minimale:
-
Commande minimale:
50 Piece
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
-
Payment Type:
T/T, L/C, Other
Personne àcontacter Ms. Haiqin
Changzhou, Jiangsu
Installation and Application
Coaxial 1.PB series cam clutch outer ring and the inner ring is maintained through the sliding bearing outer ring and the shaft, the sliding bearings can withstand the radial load acting on the outer ring.
2. Recommended shaft tolerances according to the following list.
|
model |
Tolerance (mm) |
|
PB3, PB5, PB6, PB8 |
+0 To -0.013 |
|
PB10, PB12, PB14 |
+0 To -0.016 |
3. Do not use PB as a series of clutch coupling, the coupling is preferably flexible coupling member for the shaft should be used.
4. The end face of the clutch arrow indicates the direction of rotation of the clutch before using make sure the direction of rotation is correct.
5. When the clutch for positioning purposes, use oil lubrication.
6. The key should comply with the standard JIS B1301-1959
7. Please use other means to withstand the thrust loads, do not act directly on the cam clutch.
8. driven components such as columns on the clutch outer sprocket hole tolerance should be consistent with the JIS standard H6 or H7 level requirements
