FOB Price
Obtenir le dernier prix( Negotiable )
|Minimum Order
Localité:
-
Prix de commande minimale:
-
Commande minimale:
50
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
-
Payment Type:
L/C, Other
Personne àcontacter Ms. Haiqin
Changzhou, Jiangsu
DC type is a one-way clutch wedge holder but not the inner ring and the outer ring.
• This model must meet customer inner and outer bearing support axial and radial loads, and grease and seal their own design.
· Irregular actuation contact surface of the sub-space tolerance must be within the range of the width of the outer ring and the inner ring of the non-contact surface is less than the size of the "e", the contact surface should not have any grooves to ensure proper function.
· Original provides standard type of inner and outer ring.
· If you had to manufacture hardened steel axis of the workpiece and the machine set into the wall directly.
· Grinding treated contact surface hardness of HRC *0 ~ *2 hardening depth must be greater than 0.6m.
· The internal contact surface hardness of HRC *5 ~ *5, the surface smoothness of the contact surface must be less than *2 CLA, the contact surface of the acceptable maximum width of *5mm skewness skewness of 0.**7.
|
Product name: the DC series of wedge-way clutch |
