CARBON
STEELBUTT WELD
PIPE FITTING Elbow（*5Deg,*0Deg,L/R,S/R） Tee（Straight
& Reducing） Reducer（Concentric&Eccentric） Flange(WN,
SO,BL) Size: 1/2
TO*4 (
seamless) Thickness：STD,
SCH*0,SCH*0,XXS
etc Bevel：2&2 above Standard
：GB,ASTM, ASME,ANSI We meet
thecustomer\'s special requirements, according
to drawing production.
MIKE HU ***-SALES
MANAGER MOBILE:**********0
环çƒä¿¡æ¯å‘布 ASA forged flanges A**5. Forged accesorie for
pipes. A**2. Specification for forged flanges in
alloyed or stainless steel for pipes. WELDING NECK, SOCKET WELD, SLIP ON AND
BLIND. Norm for B. *6.5, BS ***3, MSS
SPC*4 and
API **5. Pressures: **0, **0, **0, **0, ***0, and
***0 pounds. Schedules: Sch. 5S, *0S, *0, *0, *0, *0S,
*0, STD, *0, *0, XS, **0, **0, **0, **0, and XXS. Lengths from1/4" up to
*0". DIN Flanges DIN ***3 and ***6 flanges. Welding neck flanges from DIN ***0 to DIN
***8. Collar flanges DIN ***1 and
***2. Blind flanges ***7. Materials ST**7, C *3.3/8, stainless steel
and alloyed. Pressures: From PN*6 to
PN***0. Schedules. From1/2" to
*0". DIN Curves. DIN ***5.
Seamless and Welded Butt Weld Fittings from
a full range of Carbon, Stainless & Alloy seamless pipe and
Plate in the following product size ranges. Long Radius Elbows in diameters from 1/2" to
*4" in thicknesses up to SCH**0 Short Radius Elbows in diameters from 1/2"
to *4" in thicknesses up to SCH**0 Reducers both eccentric and concentric in
diameters from 1/2" to *6" in thicknesses up to
SCH**0 Caps in diameters from 1/2" to *2" in
thicknesses up to SCH**0 Tees in diameters from 1/2" to *6" in
thicknesses up to SCH**0 Lap End in diameters from 1/2" to *2" in
thicknesses up to SCH*0 And The Welded Fittings in diameters up to
*8" in thicknesses up to SCH**0. 3D Bends in diameters from *6" to *8" in
thicknesses from 1/4" to 3" Crosses & Laterals in diameters from 2"
to *2" in thicknesses from 1/4" to 6" B.W. Accesories in carbon steel and
alloyed. A**4. Pipe is accesories for high to
moderate temperature orders required. A**0. Pipe is accesories for low
temperatures orders required in all its grades. A**0. Pipe is accesories very little alloyed
and with a high elastic limit. B.W. accesories in stainless
steel A**3. Pipe is accesories in **4L***6L
stainless steel. B.W. Elbows from *5, *0up to **0, short or
long radius. B.W. Tes, reduced or all the same
ones. B.W. Excentric and concentric
reductions. B.W. Caps. ANSI NORM B *6.9 Lengths form1/2" up to
*8". For the production of our coil unit,we adopt
two processes as Medium Frequency induction heating and cold
bending.The bend-diameter and spacing can accoding the clients\'
requirements. Main materials: carbon steel, low
temperature steel, alloy steel, stainless steel, ambisense steel,
two phases steel,Titanium-nickel alloy,
copper-aluminium,etc. Production specification: DN*5
DN**0 Schedule ranges: Sch*0
Sch**0 Manifold is one of the typical products
which researched and developed by ourselves. To manufacture the
bend and straight pipes,we all adopt the process of dydraulic
hot-acrosomal towing.The geometric dimensions are accurate,the
height of the bracket is high,and the wall thickness is
grid. Main materials: carbon steel, low
temperature steel, alloy steel, stainless steel, ambisense steel,
two phases steel,etc. Production specification: DN**0
DN***0 Schedule ranges: Sch*0
Sch**0 Bends of our company are adopted the
manufacturial process of Medium Frequency induction heated, water
colded forming. Main materials: carbon steel, low
temperature steel, alloy steel, stainless steel, ambisense steel,
two phases steel, Titanium-nickel alloy,
copper-aluminium,etc. Production specification: DN*0
DN**0 Schedule ranges:
Sch*0 -Sch**0 Pipes & Tubes Seamless, EFW, ERW, DSAW
and Forged Sizes available: 1/8" through to *4" Nominal
Bore. Wall thickness:1mm through to
4". Material Grades : Stainless Steel A**2 **4/L, **0, **6/L,
**1/H, **7/H, **0, **0, **4L. Carbon Steel A**6Gr.B/C, A**9, API 5L
Gr.B. Dimensions : All pipe is made and controlled to the
relevant standards such as: ASME, ASTM, BS,
DIN/WERKSTOFFE.
