Description
**0 x *****8w
Model
GS-PL******8W
LED Brand
Epistar
Size
L**5*W**5*H*1mm
Luminous Flux
***0±**0LM
Fixture Material Aluminum+PMMA
CCT
***0K，***0K，***0K
LED Chip *0pcs /
***5 SMD
CRI
>*0
Power
*6W
Beam Angle
**0°
Input
AC*****5V
Life Span
≥****0Hours
Thoes lights are widely used in office buildings,
factories, hotels, shopping malls, schools,
offices, hospitals, home and other indoor lighting
Product Features：
Ultra thin shape, beautiful body, distinguished artwork, small
size, little weight,
easy to installation
Aluminum profiles with high quality light guide plate and diffuser,
resist the strong impact force, soft light is good for eyes
No flicker and glare, high CRI
Good heatsink ,*0,**0 hours lifespan
Special external constant current driver, stable and reliable .
Energy saving and environmental protection, no UV, no IR, no
mercury pollution, with CE, RoHS certificates
Installation wirings built-in：
Installed in ceiling keel frame on the selected area
Tilt Angle of lamps and lanterns, insert the selected above dragon
bones
Links to the DC line and DC power line of lamps and lanterns
Installation wirings lifting：
Installed in the area of the ceiling on the top of the selected
round since the locks
Fully inserted into the round wire rope since the locks, in order
to completely fixed
Square since the locks on the lamps and lanterns reserved screw
h
Lift the lamps and lanterns, wire
rope inserted into the lamps and lanterns on the back of the locks,
adjust the level height, lamps and lanterns of DC line and DC power
line link.
Installation wirings Regular：
With three profiles assemble into U suck head frame
Fixed U suck the top frame on the chosen installation area
Lamps and lanterns of lamps and lanterns into the u-shaped frame,
suction a top of the DC line and DC power line links, power supply
is placed on the back of lamps and lanterns
Article 4 profiles, assembled into a complete suction head
frame
Installation Notes：
1. Before the installation, Pls read the product specifications
carefully , and confirm if the conditions of operating environment
are compliance with the
specifications.
2. Must turn off the power, when you install, replace and clean the
lamps, to ensure personal safety.
3. The lamp must be installed by a qualified electrician, also the
wiring should meet IEE wiring electrical standards or your national
standards;
4. The lamp is suitable for indoor useage.
5. Don\'t make the lamp working long time when the voltage are
unstable state, it will affect the function and life time of normal
use.
6. No matter what the circumstances, the lamp will not be covered
by thermal insulation materials or similar materials.
7. When the lamp are working abnormally(self-extinguishing,
flashing), pls check if the connect performance of the connection
plug , power supply voltage
is normal.
8. The lamp nust be away from the heat source, to maintain
ventilation of lighting work environment, in order to ensure
appropriate environmental temperature.
9. Don\'t disassemble the product by yourself, in order to avoid
damage to the internal components. Disassemble have no quality
service.
Maintenance Notes
1. Must turn off the power before clean the lamp.
2. Pls use a relatively dry or a dry cloth to clean the lamp.
3. Don\'t use chemical or corrosive things to clean the lamp.
After-sales service
Under normal conditions, the warranty are three years. While the
quality assurance is based on the correct preservation,
installation, usage and maintenance.
And due to improper installation, break the rules of products
operation procedures, and caused by damage to the product, don\'t
fall within the scope of this
warranty.Any quality problems during the warranty period, our
company will choose to repair, replacement(parts) or replace the
new products and other methods
to solve them.Exceed the quality warranty period will be charged
the appropriate materials, labor costs.
