Description
Dust Collect Cover for CNC Router
Spindle
Model: Diameter *5mm, *0mm, **0mm, **5mm,
**5mm
The
dust collect cover fixed on the spindle, and connect with the dust
ollector machine by plastic pipe, hung by the steel tube, so
the dust collect system for the cnc router is
ok.
The dust cover
covered the spindle end and the cutter bit, so the dust is not easy
to spill out. It fixed on the spindle, move with the spindle, with
the dust extractor, it collect the chips dust at the same
time.
A dust collect
system is necessary, it is good to the working environment, good to
the workers\' health, good the machine. Keep the machine clean and
easy to maintain, longer the machine\'s working
life.
Dust collect
cover:
Diameter for the
spindle: *5mm, *0mm, **0mm, **5mm, **5mm
Dust collect
outlet: 1 or 2
Dust cover outlet
diameter: **0mm, *0mm
