Univer sal charger can be used for camcorder , camera, moible phone, USB, AA/AAA Battery and MP4

Description

1. Genearl decription

1.1 Scope of application

This specification is intended to stipulateVIP-C**6 battery chargers electrical and mechanical characteristics, appearance, external environmental requirements, etc.

2. Features of the product

This charger is intelligent and it has the following features:

1、automatically identify batteries polarity.

2、automatically identify single or doublelithium battery.

3、activate batteries with zero voltage or batteries having been protected.

4、distinguish rechargeable AA/AAA batteries from non-rechargeable ones.

5、USB output, USB is internally equipped withD+、D- terminals. The charger can charge devices that are able to identifyD+、D- terminals.

6、Lithium batteries adopt precharging, constant-current charging and constant-voltage charging, thus shall not be undercharged or overcharged.

7、AA/AAA batteries adopt pulse current charging and are controlled by -△V and time, thus shall not be undercharged or overcharged.

3.Environmental conditions

This charger is for the purpose of indoor charging

4. Electrical characteristics

4.1 input characteristics

4.1.1 input voltage DC*0V-*5V

4.1.2input current **0mA （MAX）

4.2output characteristics

4.2.1 output voltage：DC 1.4V，DC 1.4V×2，DC4.2V，DC8.4V，USB5V

4.2.2 output current：**0mA（MAX）

4.2.3 charging current：AAA*1：**0mA　AAA*2：**0mA

AA*1： **0mA AA*2：**0 mA

USB： **0mA

DC4.2V：**0mA

DC8.4V：**0mA

4.2.4 indicating function：When the charger is connected to power, its LED light turns green and light for 5 seconds before going out. If batteries are installed and normal charging occurs, the LED light would turn red. Otherwise, it will remain off. Once charging is completed, trickle charging occurs and the LED light turns green. When non-rechargeable or bad batteries are installed to the charger, the LED light turns red and flashes.

4.3 charging control：voltage control, current control, timing control

　　　

4.4 charging indications：

When charging MH-NI，MH-CD，3.7V，7.4V batteries, the LED light turns red. When the charging is completed, the light turns green.

In case of abnormal charging or charging bad batteries, the LED light turns red and flashes.

When working with USB devices, the charger can not realize its other functions and its LED light turns off.

4.5 Charging feature：　The product has the following five output methods,and each method must be used alone.

1、It can charge a single MH-NI、MH-CD AA/AAA battery.

2、It can charge two MH-NI、MH-CD AA/AAA batteries.

3、It can charge a single 3.7V Lithium battery.

4、It can chargeadouble 7.4V Lithium battery.

5、It can work with USB and charge with 5V

Power input is external input, in this case, the charger can work with car lead or power adapter according to actual needs.