Description
PTFE Gaskets
As everyone knows, PTFE has excellent corrosion resistance, but
under load will creep phenomenon of cold flow, ordinary PTFE
materials are hard, toughness is poor, but I plant the production
of PTFE gasket is made through a special process modification,
comprehensive performance is greatly improved, especially the creep
resistance. Widely used in the field of chemical, food,
pharmaceutical and other pipeline sealing. At the same time, our
company also produces Teflon products of various types, such as
plate bar, insulation casing and other products.
Product Category
:
PTFE gasket, PTFE bars, PTFE pads, PTFE insulation sleeve, PTFE
tape, PTFE insulation pads
Performance advantages:
High temperature - use operating temperature up to **0
℃.
Low temperature - with good mechanical toughness; even if the
temperature drops to ***6
℃, but also to maintain a 5%
elongation.
Corrosion - for most chemicals and solvents, showing an inert,
resistant to acid and alkali, water and various organic
solvents.
Anti-aging - aging best plastic life.
High lubricity - tetrafluoride is a solid material in the lowest
coefficient of friction.
Not adhere - tetrafluoro is a solid material in the minimum surface
tension, does not adhere to any substance.
No poison - PTFE material with physical inertia, as a long-term
implantation of artificial blood vessels and organs of the body
with no adverse reactions
Project |
unit |
value |
Density |
g/cm3 |
2.*9 |
Tensile strength |
Mpa |
2.*3 |
Compression ratio |
% |
*6.7 |
Rebound rate |
% |
*7 |
The rate of stress |
% |
*1 |
relaxation |
% |
**0 |
Elongation
Sheet size
(length *
width) mm |
mm |
***0×***0ï¼›***0×***0 |
Plate
specifications size
(thickness) mm |
mm |
1.0 ï¼›1.5ï¼›2.0 ï¼›3.0 |
The appearance of
white, semi rigid |
|
other specifications please
contact |