FOB Price
Obtenir le dernier prix( Negotiable )
|Minimum Order
Localité:
-
Prix de commande minimale:
-
Commande minimale:
100
Packaging Detail:
-
Delivery Time:
7 to 30 days
Supplying Ability:
10000 Acre per Month
Payment Type:
-
Personne àcontacter Mr. Fang
315th Tongning Road,Hongtang,Ninngbo,China,315033, Ningbo, Zhejiang
~
Automatic wall mounted faucet ***1
Product Name: Automatic wall mounted faucet
Model NO.: ***1
Origin: Ningbo China
Delivery Time: ***0days or negotiable
Minimum Order: **0PCS
Supply Ability: *0,**0Pcs/Monthly
Quality System Certification: CE
Product Details: Automatic wall mounted faucet
Features:
Automatic wall mounted faucet, body detecting, sensor be installed
on aerator.
The water will only flow when hands are put within range of the
sensor, as soon as the hands are removed the flow will stop. This
contributes to considerable water savings
After installation the faucet is in touch free operation, this
reduces the risk of transfer of bacteria
SCM control provides a limited water flow of maximum one minute,
even when fixed objects are still within range of the sensor
Can also be operated with battery backup (applies to controller #1
only)
Installation guide:
Please connect the supplied flexible hose to the water inlet
connection on the control box.
Please follow the instructions in drawing 1 if only cold water is
used.
In case of using both hot and cold water supply, please install
a mixing valve prior to connection to the control box in
accordance with drawing above.
Install the control box on the wall in accordance with appropriate
EU regulations for safety and/or applicable local standards.
Install the faucet on the wall.
Connect the flexible hose to the water outlet connection on the
control box.
Connect the sensor cable to the control box.
Make sure all water connections are tested and found without
leakage prior to switching on the power the control box.
Plug in the power cable and/or install 4 AA Alkaline batteries.
Instructions for use:
Sensor/flow test.
When the unit is powered on, water should flow immediately when you
put your hands within range of the sensor. When you remove your
hands out range the water should stop immediately.
The maximum duration of continuous flow is 1 minute.
Sensor range
The default factory set distance is *2~*5 cm. When powered on
for the first time, place your hands at the desired distance within
5 seconds after the power has been switched on and remove your
hands after approx 2 seconds in order to change the factory
setting.
To reset the setting, interrupt power for at least *0 seconds and
follow the procedure as described to set the sensor range
correctly.
Strainer
To prevent blockage please clean the strainer regularly, make sure
you shut of the water mains, unscrew the water inlet hose, remove
the strainer, clean with water and a soft brush. Then install
the items in reverse order, turn on water mains and check for
leakage.
Battery Change:
The indicator light in the sensor will flicker 3 times per second
to indicate the batteries are at the end of their useful life. At
this stage the unit will not operate in battery more
anymore
In case you have plugged in the mains, disconnect power and open
the cover of the control box, open the battery holder, remove
the batteries and replace all batteries with new ones.
Please make sure you install the batteries in the right direction,
the + and - side are indicated in the battery holder.
Close the battery holder, place the cover back in place and tighten
the screws.
Follow the instructions for setting the sensor range if
required.
Problem:
The unit does not work. Please check for power connection or
replace the batteries, check connection of the sensor cable.
There is power however no water flow,
Please check the water supply, open any closed valves if
necessary
Check water connections for blockage, clean if necessary
Check Strainer for Blockage, clean if necessary
Disconnect power for *0 seconds and re install
Check water connections for twists
Check sensor cable connection
Clean the sensor with a soft cloth
Caution:
Please handle the product with care whilst installing
Only clean with soft cloth, no abrasive cleaning agent, acidulous
cleaning agents.
Do not spray the control box with water.
Only clean the sensor with a soft cloth, scratching will reduce the
range and sensitivity of the unit itself
Features:
The water will only flow when hands are put within range of the
sensor, as soon as the hands are removed the flow will stop. This
contributes to considerable water savings
After installation the faucet is in touch free operation, this
reduces the risk of transfer of bacteria
SCM control provides a limited water flow of maximum one minute,
even when fixed objects are still within range of the sensor
Can also be operated with battery backup (applies to controller #1
only)
The faucet bent tube is swiveling.
Installation guide:
Please connect the supplied flexible hose to the water inlet
connection on the control box.
Please follow the instructions in drawing 1 if only cold water is
used.
In case of using both hot and cold water supply, please install
a mixing valve prior to connection to the control box in
accordance with drawing above.
Install the control box on the wall in accordance with appropriate
EU regulations for safety and/or applicable local standards.
Install the faucet on the wash hand basin, please review drawing 2
for reference.
Connect the flexible hose to the water outlet connection on the
control box.
Connect the sensor cable to the control box.
Make sure all water connections are tested and found without
leakage prior to switching on the power the control box.
Plug in the power cable and/or install 4 AA Alkaline batteries.
Instructions for use:
Sensor/flow test.
When the unit is powered on, water should flow immediately when you
put your hands within range of the sensor. When you remove your
hands out range the water should stop immediately.
The maximum duration of continuous flow is 1 minute.
Sensor range
The default factory set distance is *2~*5 cm. When powered on
for the first time, place your hands at the desired distance within
5 seconds after the power has been switched on and remove your
hands after approx 2 seconds in order to change the factory
setting.
To reset the setting, interrupt power for at least *0 seconds and
follow the procedure as described to set the sensor range
correctly.
Strainer
To prevent blockage please clean the strainer regularly, make sure
you shut of the water mains, unscrew the water inlet hose, remove
the strainer, clean with water and a soft brush. Then install
the items in reverse order, turn on water mains and check for
leakage.
Battery Change:
The indicator light in the sensor will flicker 3 times per second
to indicate the batteries are at the end of their useful life. At
this stage the unit will not operate in battery more
anymore
In case you have plugged in the mains, disconnect power and open
the cover of the control box, open the battery holder, remove
the batteries and replace all batteries with new ones.
Please make sure you install the batteries in the right direction,
the + and - side are indicated in the battery holder.
Close the battery holder, place the cover back in place and tighten
the screws.
Follow the instructions for setting the sensor range if
required.
Problem:
The unit does not work. Please check for power connection or
replace the batteries, check connection of the sensor cable.
There is power however no water flow,
Please check the water supply, open any closed valves if
necessary
Check water connections for blockage, clean if necessary
Check Strainer for Blockage, clean if necessary
Disconnect power for *0 seconds and re install
Check water connections for twists
Check sensor cable connection
Clean the sensor with a soft cloth
Caution:
Please handle the product with care whilst installing
Only clean with soft cloth, no abrasive cleaning agent, acidulous
cleaning agents.
Do not spray the control box with water.
Only clean the sensor with a soft cloth, scratching will reduce the
range and sensitivity of the unit itself
