1-CH POE Extender Over Coax Converter/network over coax By ShenZhen MUXBOXS Science & Technology Co, China
Pas encore membre de TradeKey.com? Inscrivez-vous pour vous connecter avec 9 millions d'importateurs et exportateurs.
Rejoignez-le maintenant c'est gratuit |
BOOK A CALL
Book Call On Your Favorite Time

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

Contact Us
1-CH POE Extender Over Coax Converter/network over coax

1-CH POE Extender Over Coax Converter/network over coax

69 ~ 79 / Pair

|

Minimum Order

Localité:

-

Prix de commande minimale:

Commande minimale:

5 Pair

Packaging Detail:

220mm*160mm*85mm

Delivery Time:

3-15 working days

Supplying Ability:

999 Pair per Week

Payment Type:

T/T, Western Union, Money Gram, PayPal

Contacter maintenant
Membre gratuit

Personne à contacter John

Shenzhen, Guangdong

Contacter maintenant

Description


Features & Benefits ※POE can be up to 3,**0ft(1km).
※Supply Maximum *2V2A Power to Ethernet Devices
※Easy configuration ,with no IP or MAC addressing required.
※Built-in Multi-stage Surge Protection.
※Built-in Multi-stage overcurrent and overvoltage protection
※Built in LED indicators for network signals ,link status
※Preserve investment in coax infrastructure
※Network connections in harsh electrical areas Overview        The MB-ECP*1 is single POE  Transmission that can transmit  *0/**0 Base-T Ethernet signal ,and Maximum supply *2V/2A Power to the Ethernet Devices ,at the same time.it allows any CCTV IP camera or other Ethernet Devices to be connected within extended distance without extra power.With super interference rejection and multi-stage high-end TVS for surge protection,the MB-ECP*1AT/AR supports Ethernet Signal to be transmitted up to ***0ft(**0m)at the speed of *2Mbps and up to ***0ft(2km) at *5Mbps,Power transmission up to 3,**0ft(1,**0m),in any harsh electrical areas.the device is often used in legacy installations where existing cable is re-deployed as part of an upgrade to IP cameras or other Ethernet Devices.
MB-ECP*1AT/AR can work in pairs or work with MB-ECP*4AR,and can supply up to *4W(*2V/2A) power to the Ethernet Devices.and the power consumption is low enough.The transmitter is extremely simple to use,with no IP or MAC addressing required.
   
 
 
Specifications
Product Name *-CH Ethernet &Power long distance transmission
Devices CCTV IP cameras, NVR, IP encoders,network switches and any device with a *0/**0Mb/s Ethernet port, supporting IP
    Standard supported IEEE **2.3 *0BaseT,IEEE **2.3U **0Base-TX,
IP ver 4 and 6.
Maximum Distance Distance Total transmission rate (max) Power ( Output For Devices )
***0ft (**0m) *2Mbps *4 Watts(Max)
***0ft (**0m) *6Mbps *3.9Watts(Max)
***4ft (**0m) *4Mbps 8.6Watts(Max)
*2,*0ft (1km) *7Mbps 6.5 Watts(Max)
RJ*5 Ethernet Interface Connector RJ*5
Wire type *-pair Cat5 or better
Distance up to **8ft (**0m)
Speed *0/**0Base-T,half/full duplex,auto-negotiation auto MDI/MDIX cross-over
Latency   3mS
coax cable Interface Connector BNC, RG**9/U or similar
Impedance *5Ω
Power DC input   *8V/1.5A
Power connsumption 1.2Watts(Max)No external supply required
*2VDC Output for Devices *4 Watts (Max)
Leds indicator Green Led coax cable connect
Yellow Led Network Signal communication
Surge Protection 2KV(different-mode), 4KV(common-mode)
Temperature Operating: 0° to *0°C
Storage: **0° to *5°C
Humidity: Up to *5% non-condensing
Enclosure Aluminum alloy
Dimensions(packaging) **0***0**5mm
Weight(packaging) **5g

 

Send a direct inquiry to this supplier

To:

John < ShenZhen MUXBOXS Science & Technology Co >

Je veux savoir: