Intelligent swing turnstile gates
Technical
Housing: **4 Stainless
steel
Housing size: see
picture
Boom length:
******0mm
Boom direction: Bi-directional
(optional)
Working Voltage:
AC**0V ±*0%V
/ *0 ±*0%HZ
Driver motor: *4V DC brush
motor
Working temperature: **0 degree~*0
degree
Working humidity:
≤*0%,
no condensation.
Installation environment: indoor/outdoor
(shelter)
Card reader window size: standard size,
OEM acceptable.
Transit speed:
****0persons/min
Communication interface: RS**5 standard
socket, ≤***0m
Input interface: Dry contact DC*2v
electrical level signal
width ≥**0ms
or DC*2 impulse signal, driving current
≥*0mA
Function
1. Several reader devices are attachable
(IC, ID, magnet card, barcode ticket,
etc)
2. With function of self-examine and
alarm, it is convenient for maintenance and
use.
3. Be able to program running status by
the small keyboard. With self-counting function in main
board
4. Flap door will stop move when it is
being blocked, which prevent pedestrians
from
5. Automatically open the gate when power
off and automatically close when power
on.
6. Working noiseless and reliable, user
can unlock the gate freely when
necessary.
7. Multiple mode workable, can read/pass
bi-direction; Or reading/passing from one side when
the
other side blocked; or reading at this
side, the other side can pass freely. User can set up
accordingly
in main board
menu.
8. It is optional to set up the close time
(***0s limited) from main board menu after reading a valid
card
for passing by the
gate.
9. The door will cancel pass signal and
replace in position automatically when people miss the
setting
time to pass the gate after card reading.
User can set up the timing as
necessary.
*0. The gate is locking except having
received a valid open signal. For stop anybody break in without
permission.
