FOB Price
Obtenir le dernier prix|
Minimum Order
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
export package
Delivery Time:
-
Supplying Ability:
-
Payment Type:
-
Personne àcontacter Hebe
Huizhou, Guangdong
BMD series are designed to remove the moisture from condensing on the mould surface.
Features:
1)P.I.D control tempreture.
2)Honeycomb rotor is used to ensure constant air dehumidifying effect.
3)Microprocessor board is fitted to indicate machine running status and to diagnose malfunctions.
4)Under normal state and atmospheric conditions the humidity content of air can be controlled exactly all year round.
5)Inhibits corrosion and prolongs service life of the mould and yet reduces moulding cycle time.
6)Air temperature generated by this series of machine is about *0 Degree Celsius , this ensure moisture condensation in the moulding
area will not occur.
Accessory option:
1)Removable return air collector that is used to collect return air from the moulding area back to this machine
and to form a closed-loop air circulation.
2)Dew-point monitor can be fitted as option to detect ary air quality.
Features
1)BCD series compact dryers are equipped with honeycomb rotor for dehumidifying. They have two kinds of design:fully-integral and semi-integral depending on the size.
2)Suitable for drying hygroscopic engineering plastics such as PA,PC,PBT,PET,etc.
3)Integration of dehumidifying, drying, and two-stage conveying functions in a single unit. Three-stage conveying is also available as an option.
4)Insulated drying hopper features dry air down-blowing and cyclone exhaust design. This improves drying efficiency and reduces energy consumption which maintaining a steady drying effect.
5)Closed-loop conveying system eliminates the possibility of moisture re-absorption during material conveying.
6)The dehumidifying section of BCD series features two condensers to ensure a low return air temperature and low dew-point.
7)Equipped with pneumatic shut-off valve to ensure no material remains in the material line after each loading cycle.
8)Material processing is controlled via microprocessor as standard with touch screen PLC control as an option for centralised and automatic operation.
9)Dew-point monitor can be fitted to monitor and display dry air dew-point.
