Description
KOMEG Technology CO., LTD was founded in ***0. We specialize in the
field of environment test chamber for about *3years.
The features of our products:
1. LED Touch Screen Programmabe Controller
2. France imported Tecumseh compressor
3. Friendly man-machine communication interface
4. One year warranty
Standard configuration
Sight window*1, cable port(portΦ *0mm)*1, shelves*2,
chamber lamp*1, power cable *2m
No fuse breaker, over pressure\over heat and over current
protection for compressor,
Over temperature protection, over load protect of blower, dry heat
protection
Optional accessories
Cable Port: Φ **0mm cable port is available
Shelves
Ro-type water purifier: R**0/day
Provide to keep the humidifying heater and wet bulb wick free from
scale.
Inner glass door with operation port
A glass door can be provided behind the main door so that specimens
can be observed. Two operation ports of **0mm diameter are used for
handing specimens inside the chamber without opening the glass
door.
Dehumidifier
The rotation regenerating dehumidifier M***0 ensures precise
control of low humidity (5° C 5%RH) for electrostatic
reliability tests.
Temperature and humidity recorder
***0 to ***0° C /0 to **0%RH **0mm with effective width
**0mm and 2 pen
Temperature 1 pen and humidity 1 pen.
***0 to **5° C /0 to **0%RH **0mm with effective width
**0mm and 6 dots
Temperature 3 dots and humidity 1 dot.
***0 to ***0° C /0 to **0%RH **0mm with effective width
**0mm and *2 dots
Temperature 6 dots and humidity 6 dots.
Defrosting circuit
The chamber automatically detects and melts the frost on the
evaporator when operating below 0° C.
Liquid or infection
In order to rapidly decrease the temperature inside the chamber, a
cylinder of liquid can be connected the chamber.
