FOB Price
Obtenir le dernier prix25 / Meter
|Minimum Order
Localité:
-
Prix de commande minimale:
Commande minimale:
100 Meter
Packaging Detail:
Plastic Sheeting
Delivery Time:
15 to 20 days
Supplying Ability:
20000 Meter per Month
Payment Type:
-
Personne àcontacter Mr. Alister
Free Trade Zone, Qingdao, Shandong
1.Non pressed PVC type
    After dipping with PVC paste on the
soild woven fabric, add PVC cover on the solid carcass to form the
belt.
2.PVG type
    Based on the non pressed PVC type, the
carcass is covered with top and bottom covers composed mainly of
rubber. The belt is then formed after being pressed.
  1. The belt has good flame resistant and anti-static
properties. It can fully satisfy the requirements of MT***4 and is
especially suitable for material conveying at inflammable
conditions of underground coal mines.
  2. The solid woven fabric uses high tensile strength
and low elongation polyester long filament as warp fibre, for weft
fibre, it uses high tensile and medium modulus nylon filament. The
fabric is high in strength, low in elongation,light in carcass,free
of separation of plies, shock resistant, anti-tear and good in
troughability.
  3. Non pressed PVC type is suitable for applications
in dry conditions at a slope angle of no greater than *6 degrees.
PVG type is suitable for applications in wet conditions at a slope
angle of less than *0 degrees.
  4. PVG type is covered with covers mainly composed
of rubber,  which further improves the
troughability,resistance to wetness and slip, resistance to low
temperature, elongation and wear resistance of the belt. Thus it
can not only enhance the slope angle of conveying but also elongate
life of belt.
Â
| TECHNICAL SPECIFICATION FOR REFERENCE | ||||||||||
| Grad | TENSILE STRENGTH | Carcass thickness | Carcass weight | Elongation | Cover rubber thickness | Width | Min.pulley diameter | |||
| (Min)(N/mm) | mm | kg/m | (Min)(%) | (mm) | (mm) | (mm) | ||||
| Longitudinal | Latitudinal | Longitudinal | latitudinal | PVC | PVG | |||||
| **0s | **0 | **5 | 6.5 | 8.5 | *5 | *8 | 1.5*1.5 | 1.5*1.5 | *******0 | **0 |
| **0s | **0 | **0 | 6.9 | 9 | *5 | *8 | 1.5*1.5 | 1.5*1.5 | **0 | |
| ***0s | ***0 | **0 | 7.5 | 9.7 | *5 | *8 | 2*1.5 | 2*1.5 | **0 | |
| ***0s | ***0 | **0 | 8.5 | *1 | *5 | *8 | 2*2 | 2*1.5 | **0 | |
