Back wash valve

Description

~â– Backwash Vavle Features

1. Made from reinforced engineering plastics, sturdy and durable.
2. Hydraulic driven control by double chambers, flexible application, used for three port control including angle (A) and straight (S) water flow directions;
3. Short travels, thus smooth water flow direction changes, eliminates the mixing of supply and waster water like others valve, better sealing, no maintenance required;
4. High throughput Flux, less pressure loss;
5. Can be installed in any direction, wider range of applications;

~Backwash Vavle Control valve specifications

~1. Working pressure: ***0 Bar (2.***0.2 kgf/cm2);
2. Working temperature: < *5℃
3. Valve body material: reinforced nylon

* flow rater Q：M3/H,
pressure loss△P：Bar；

~ Backwash Vavle Application Examples:

Jieming B series backflush valve is used for supporting applications in various media filters, disc filters, mesh filters and etc. while filter unit backwashing, diaphragm driven valve plug, firstly close inlet water, then use filtrated water backwash either filter medium or filter unit, and drain out, valve open and close is controlled by the system’s water pressure or air pressure, can be controlled by a signal from 3 way solenoid valve, stager or pilot valve, thus 2 cycles as follow:

~●Filtration: inlet water passes through control valve to filter unit,
then flows into the system and flows out.

~●Backwash : close control valve inlet water and open the drain port,
Thus the outlet pipe water backwash the filter unit, and drain out with impurities.