Description
1. What is HHO gas generator
HHO gas generator is able to separate clean soft water (H2O) into
hydrogen and oxygen gases, using a small amount of electric power
through a special
process. These gases are then mixed and delivered for use in a wide
variety of applications, such as heating, brazing, cutting, etc.
which currently use
LPG or other gas for fuel. When burned, this fuel generates no
green house gases or pollutants, and burns at virtually **0%
efficiency. This certainly has
the potential for becoming the most significant advancement in fuel
for the *1st century.
2. What is the HHO gas flashback arrestor
1)The flashback arrestor, which is installed in the gas out end of
valve, can keep from backfire and protect the sealing ring of
valve when there is any back-fire. Therefore it can extend the
service life of valve sealing ring.
Some torches in the present market cannot keep the machine from
backfire, the sealing ring of torch valve will lost
effectivenessafter using some time so
that it will cause back-fire. Some install the flashback arrestor
in the gas-in end of valve, therefore, it will hurt the sealing
ring when there is any
back-fire, let back-fire enter into the gas-out end of flashback
arrestor, it may cause that the flame is still burning in the exit
of flashback arrestor
after closed valve so thatit will damage the torch.
As a result, our oxyhydrogen torch has installed a flashback
arrestor in the front of valve. If there is any back-fire when
closing the valve, the
flashback arrestor will stop back-fire entering into the valve
automatically. So the flashback arrestor will flame out
automatically because of no gas, the
flame won't reach to the valve forever and sealing ring will get
the efficient protection.
Â
2). Main technical parameter of flashback arrestor
Working medium: oxyhydrogen gas, hydrogen gas, acetylene and so
on.
Opening voltage: 0.**5MPA (0.*5Kg.f/cm2) Flux: >1m3/h
Function:flame out the back-fire continuously
4.Model of flashback arrestor
FA0:either ends is M*6*1.5 standard screw thread, apply in
connecting with metal pipe or cylinder pressure reducing valve.
Â
FA*1: either ends are leather hose joint 8mm, to install in the
leather hose. Â
FA*2: either ends are leather hose joint 5mm, to install in the
leather hose. Â
Â
3). Notice
1) The arrow mark on the flashback arrestor refers to the direction
of airflow under the normal work.You shouldn't install it
reversely,otherwise the gas
cannot pass through. You should check the joint whether there is
any gas leakage.
2) The flashback arrestor is forbidden to be opened. Once it is
opened,you must do the efficiency test again.Qualified ones need to
present the conformity certificate again,or it cannot be installed
to use.
3) Once the flashback arrestor have any damage, you must stop to
use immediately and renew it to continue to use.The flashback
arrestor must force to bereplaced after using for half a year.
4) You must do the inspection by using the qualified efficiency
test equipment when examining and repairing the flashback arrestor,
qualified ones need to
present the conformity certificate again. If you haven't
specialized efficiency test equipment, you need to replace it
instead of repairing.
5) The factory package should be placed in a dry and ventilated
place, the flashback arrestor is forbiddento touch anything smeary
and corrosive. Do not throw it heavily or the flashback arrestor
will be damaged.
3. What are in the HHO torch box
Oxyhydrogen Anti-backfire Flame Welding Torch box:
1.precise
2.for welding
3.for cutting
4.build-in flashback arrestor
Â
